Tech Support
Local Repair
Reviews & Ratings

Join | Answer Questions | Sign In

Online User Manual and Guide for Canon PIXMA iP4000 InkJet Photo Printer

Canon PIXMA iP4000 InkJet Photo Printer > User Guide
Showing Page 6 out of 33 Previous     2 3 4 5 [6] 7 8 9 10     Next

Let FixYa Experts
Solve Your Problem
Ask!
Loading problems.


Showing Page 6 out of 33 Previous     2 3 4 5 [6] 7 8 9 10     Next

Ads by Google

1.  MAINTENANCE 1-1.  Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement Consumables by Service Engineer (1)  Adjustment Note:  DO NOT loosen the red screws on both sides of the main chassis, securing the carriage shaft positioning. *1:  Red screws of paper feed motor The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit. (2)  Periodic maintenance No periodic maintenance is necessary. (3)  Periodic replacement parts There are no parts in this printer that require periodic replacement by a service engineer. (4)  Replacement consumables There are no consumables that require replacement by a service engineer. Adjustment Timing Purpose Tool Approx. time EEPROM initialization (EEPROM settings) At logic board ass'y replacement To initialize settings other than the following: - USB serial number - Destination setting - Waste ink counter - CD-R correction value None. 1 min. Destination settings (EEPROM settings) At logic board ass'y replacement To set the destination. None. 1 min. Waste ink counter resetting (EEPROM settings) - At bottom case unit replacement - At ink absorber (QC1-4221 / 4222 / 4223 / 4224 / 4263 / 4264 / 4864 / 4257) replacement   To reset the waste ink counter. None. 1 min. CD-R sensor / automatic print head alignment sensor correction (EEPROM settings)   - At logic board ass'y replacement - At carriage unit replacement   To correct the CD-R and automatic print head alignment sensor.   None. (Correction performed through service test print) 2 min. Print head alignment - At print head replacement - At logic board ass'y replacement - At carriage unit replacement   To ensure accurate dot placement. - None. (printer buttons) - Computer (settings via the printer driver) 2 min. Paper feed motor position adjustment*1   At paper feed motor unit replacement To adjust the belt tension. (Position the paper feed motor so that the belt is stretched tight.)   None. 2 min. Grease application - At carriage unit replacement - At chassis' upper gear replacement - At shaft lift (QC1-4331) replacement   - To maintain sliding properties of the carriage, carriage shaft, and shaft lift. - To protect the chassis' upper gear.   - FLOIL KG-107A (QY9- 0057) - MOLYKOTE HP300 (QY9-0035)   1 min. 1 - 1