Top 20
Canon (D80-0726-201) Video Capture Questions & Answers
Computer won't recognize Canon Megapixel
More often than not it's a drive letter issue...meaning that when you plug in your camera, Windows assigns it a drive letter like "E:" but something else is already using that drive letter (like external USB drivers or card readers).
To correct this you can manually assign each device their own drive letter.
1. Insert the device (camera)
2. Right-click "My Computer" and select "Manage".
3. Click on "Disk Management"
4. Right-click the item in the list that looks
like your camera and then click "Change Drive Letter and
Paths."
5. Click "Change".
6. Give it a drive letter that is not being used.
7. Click OK.
The device should work instantly after that.
1/19/2010 8:34:50 PM •
Canon...
•
232 views • 0 helpful votes
Lost remote controle
What is the brand name and model number of the device do you want remote control?
I bought a usb cable and hooked them up but the
click start control panel administrive tools computer management device manager scroll to ports(COM&LPT) + to expand you should see a communication port and Ecp printer port you might see a yellow?question mark this will mean you need to install a new driver for this device right click you will have options to update driver,disable,uninstall or select properties again you will have the similiar options also you can troubleshoot the device
hope this helps
No power goin to tv
I saw your post, dwayne74958, and would be happy to help you with that! In order to properly assist you, there are a few questions I need to ask to better understand the situation. Could you specify what pieces of equipment work and which do not? Is the issue with the TV that it doesn't turn on at all, or just has a black screen? Do the lights on the receiver turn on when you power it up, or does it not turn on at all? What type of receiver do you have? The model number is found on the front panel in the bottom left corner.
Check behind the receiver and TV and make sure all connections, especially the power cords, are secure. If you have everything plugged in to a power strip, make sure the power strip is plugged in to the outlet on the wall and that it's turned on. If this already looks proper, you may need a new power strip. Let me know about that and I'll look forward to assisting you further!
Hope that helps!
My set will turn on but only run for about a half
This is the problem of the T.V transformer. A simple replacement will solve the issue. It can be easily seen if you remove the back cover of your television. It looks like a small matchbox wound with copper coil all around it. It is not so expensive and available in all leading T.V or electrical shops.
Sony kp tv stand by light keeps blinking and no picture
Hi,
The standby light LED BLINK is in specific numbers, please count that how many time LED BLINKS in specific time and in specific numbers like 1 time 2 time 3 times etc, every blink has its area of fault which processing IC detects, Therefore please count and let me know the number of blinking stand by light and then i can tell you the area of fault and its solution.
Hope you will understand my sayings, if need more clarification write in comments.
thanks for using fixya.
I have a real problem!
In many camcorders, on screen display can be switched off in playback.
Let me know exact model of camcorder to look for detailed solution.
2012 troybiilt super pony transmission axel is trying to slide out how to fix it
The axles may have substantial amount of in/out play, 1/4 inch or more. Does the axle in question actually drive the wheel or does it freewheel?It's a typical differential so if you get both wheels off the ground and spin one wheel, the other wheel should rotate in the opposite direction.The axles are retained by the differential assembly (inside transmission) so if the axle is truly falling out, to fix it will require transmission be removed and opened. Probably not an economical repair unless you can DIY or replace with good used unit.
Tcl power comes on but no picture or sound. Tv has backlight lights when powered on
Hello ! It sounds like you are experiencing some issues with your TCL TV. It's great that the backlight lights are working fine. The blinking *********** light and white screen definitely indicate a problem.
One possible issue could be with the internal circuitry or the display panel itself. It's best to contact TCL support or a professional technician to diagnose and fix the problem. In the meantime, you can try power cycling the TV by unplugging it for a few minutes and then plugging it back in.
As for uploading a video, you can try connecting your device to a computer and transferring the video file that way. Alternatively, you can upload the video to a platform like YouTube and share the link for others to view. I hope this helps!
Not finding what you are looking for?