20 Most Recent
Baumatic 24 in. BFD60SS Free-standing Dishwasher - Page 5 Questions & Answers
Not heating water
If all of the cycles are working with cold water, then the controller circuit is OK. If the hot water cycle fails, it can be the heating coil. Depending on age, some retire sooner than others and need to be replaced. Only a service tech. can do a test unless your experienced at continuity checks.
3/18/2014 8:39:19 PM •
Baumatic...
•
Answered
on Mar 18, 2014
Baumatic washer dryer, dryer has stopped working any ideas
test the drying element to see if power is getting there during the drying cycle. if it is getting power but not heating you will know to replace the element. if it is not getting power, you will have to check the components that supply power to the element
11/25/2013 10:30:29 AM •
Baumatic...
•
Answered
on Nov 25, 2013
Squealing noise
A loud high pitch whine while running the dishwasher means that there is something caught in the chopper assembly. To get to the chopper assembly you need to take the racks out and take the pump apart from the inside of the dishwasher. The chopper assembly looks like a metal grate with holes in it. And it might not even be stuck in the grate but somewhere in the pump area due to the water being pumped out, so the best idea is to take the whole thing apart and clean everywhere. However I do not recommend doing this unless you are completely certain you will remember where the screws and gaskets go, otherwise you risk damaging your pump or house from a leak or improper installation. You have been warned.Here is
Manual onlineManual online
11/4/2013 8:36:32 PM •
Baumatic...
•
Answered
on Nov 04, 2013
Not finding what you are looking for?