20 Most Recent
Compaq dc7100 Small Form Factor (PJ361UA) PC Desktop Questions & Answers
Issye
livesupport.maybenow.com/Compaq/Compaq-dc7100-Small-Form-Factor-PJ361UA-PC-pr60882
No sound
no sound after your remove sound software. try removing hardware sound driver remove sound software. restart system when windows see sound hardware wants to install a driver don't install the sound driver software it install driver and sound package. should fix problem let me if it helped thanks good luck
Sound card
hmmmm... try to reinstall the OS again then install the driver of the motherboard... when the sound driver is installing a window will appear like new hardware found wizard just don't click it w8 until the driver will install.. ^^
Video driver
did you remove the previous driver first..through control panel, then system, then device manager?
Trouble with my computer
to make the computer faster
Click on start
click run
(type) msconfig
Click on the Startup tab at the top
Clcik disable all at the bottom
click close and restart the computer
I want to upgrade my video
hi Johngalbr
happy Holidays
What of the 3 models is yours? convertible, little form factor? or ultracompact system? depending on that, you may usa a PCIE video card, or a single card.(riser) you can try to see in BIOS setting if you can do this too.
good luck
No power
1. Please check with the power supply of pc from a/c plug.
2. if power supply is ok then ensure that the input poewer cord is at right position in behind of cpu.
3. If you are using old type power supply (which do not autumatically turned off by operating system) then there is problem with power switch or SMPS.
4. If you are using advance power management (generally used in now-a days computers which is automatically turned off by O.S., then there may be a problem with power pin that is connecting thae mother board and power button. Shut down your computer and open the cpu chasis and tighten the pin and ensure that it is properly inserted (the location of the pin is near hard disk lid pin, power lid pin).
5. If this pin is ok then check with pconnecting wire of pin and power button and also the power button.
6.Then turn the computer on. If it does not work then check the power connectors from SMPS to mother board are properly installed and inserted.
7. If power connector is ok then there is posssiblity of problem with your SMPS (power supply) of computer.
8.Generally due to heavy load of power and long usage the condensers of smps get mailfunctioned. Take the smps or computer to a local hardware expert.
Not finding what you are looking for?