FixYa.com
Technical Support, Instructions & Repair Service
Home | My Products | Sign In

Online User Manual and Guide for Epson Aculaser C1100 Printer

Epson Aculaser C1100 Printer > User Guide
Showing Page 1 out of 2 [1] 2     Next
Search keywords inside this manual:

Showing Page 1 out of 2 [1] 2     Next

Sponsored Links

FixYa does not evaluate or guarantee the accuracy of any information provided through its proposed solutions, posts, or Expert Assistance Sessions. By entering this site you declare you read and agreed to its Terms. You may NOT copy or distribute the content that appears on this site without written permission from FixYa Inc.
© 2005-2008, FixYa, Inc. or its affiliates
Turn over Setup Guide Notes contain important information and useful tips on the operation of your printer. Finding a Place The illustration shows the recommended amount of space. For information and cautions, see the Safety Instructions sheet. Removing the Protective Materials Plugging in the Printer Installing Consumables For specifications and handling precautions, see the Reference Guide. Toner Cartridges and Photoconductor Unit 1.   Make sure the printer is turned on, then open cover A. Note: The letters C, M, Y, or K appear in place of uuuu and indicate the colors Cyan, Magenta, Yellow, and Black respectively. 2.   Remove the cover from inside of the printer. 3.   Shake the toner cartridge enough. 4.   Hold the tag and gently pull the toner seal upward. 5.   Insert the toner cartridge firmly with aligning the arrow mark. 6.   Lock the toner cartridge. 7.   Close the cover A. 8.   Repeat 1 to 7 steps to install other toner cartridges. 9.   Make sure the printer is turned on, then open the cover B. 10. Raise the yellow lever up. 11. Take the photoconductor unit out of its package, then remove the protective sheet. 12. Insert the photoconductor unit firmly with aligning the arrow marks on the printer. 13. Push the yellow lever down, then close the cover B. Loading Paper 1.   Open the MP tray cover, then slide the right paper guide outward. 2.   Set A4 or Letter size paper into the tray with the printable side facing up, then close the MP tray cover. Testing the Printer 1.   Make sure the printer is turned on. 2.   Make sure the LCD panel shows Ready. Press the Enter button three times. The printer starts printing a status sheet. Note: If you are unable to get the printer to print a normal status sheet or you have a problem with print quality, see “Problem Solver” in the Reference Guide. 4049771-02 XXX