http://www.fixya.com/support/p342981-epson_stylus_photo_r1800_inkjet_printerSolved technical support problems provided by FixYa users.en-usCopyright (c) 2007 FixYa, LTD. All rights reserved.info@fixya.comFri, 29 Aug 2008 20:14:15 GMT80http://www.fixya.com/support/t625390-epson_stylus_photo_r1800_printertop 2 lights are flashing red paper jam button and ink button but no green button cannot get the printer to start againFri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t612930-communication_error_turn_offI cannot get my computer (G5 imac running 10.4.11) to talk to my Epson 1800 printer. I keep getting the 'communication error' message from the printer utility. Please note that: - nothing has changed in my computer set-up since I last used it without...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t675696-failure_epson_stylus_r_1800_printerFrom Lowerhouse to CompuG Re the Epson R1800 inkjet printer; no viable solution has been advanced so far. The prints can fail at some point randomly in the process and yet sometimes they print properly and fully. It is a very frustrating fault. The...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t934675-epson_1800_problems_new_imacDownloaded new driver 6.0 for epson?R1800 for new imac, but colors are still off. ?Cannot load original software sp?R1800 v3 because imac will not load the driver to use with iphoto. ?Any suggestions ?on how to load older driver to manage printer....Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t250477-epson_stylus_photo_r1800_print_colorsBrand new r1800- brand new imac with leopard, downloaded correct drivers for leopard, communicates fine, but printer will not print full blacks and colors are completely off- desaturated and just wrong. ?computer store insists its me doing the...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t348336-paper_either_just_rolls_without_printingThis is a recent problem. When I try to print, sometimes it works great. Sometimes the paper just rolls through with no attempt to print and the paper light comes on. If I push the paper button the next sheet sometimes prints but lately it won't...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t676391-problem_using_sublimation_inksAm using sublimation inks with the Epson Photo R1800 printer and the red light comes on above the Cyan and Matt Black cartridges although they are fitted up correctly and the ink is fitted. The error message says that they are empty and that Epson...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t309671-epson_stylus_cx8400_paper_jam_errorI just got and installed the printer the very first print it jams. I pull out the paper and notice the bottom right corner is missing in the printer. I end up printing 2 pages, than get a printer jam error. I cannot see any paper in the printer, but...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t228784-unable_print_from_csI'm using mac and when I try to print from Illustrator CS, a window which shows status and name of documents appears, says 'media out or not loaded correctly'. I saved the document and opened it with preview (application) then it print out fine. I...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t371048-remove_print_head_epson_stylus_photoI have a epson stylus photo r1800 and I want to be able to remove the print head for cleaning the outside of the jets by squirting solvent over them over my sink. ?How can I do it? ?Is it easy? ?And while I'm at it how about the sponges that catch...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t333035-print_cd_driver_software_epson_stylusI made the ultimate mistake of buying the printer on eBay! When do you buy a used printer? NEVER! I went thru no less than two complete 8 cartridge sets of ink blowing out the nozzles, and when I finally mustered up the courage to print on a DVD,...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t703041-grabber_black_composite_material_notEver since i had a serious jam using a soft canvas, the grabber has not done its job. Can I get a replacement and install it??Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t646137-epson_stylus_photo_r1800_photo_inkjetI logged in yesterday with my problem which was an erratic misprint. I paid 10 dollars for a solution but have not had a satisfactory response. I received a reply from one of your 'gurus' but this was not satisafactory. Lowerhouse.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t801068-dirty_printoutsThe print quality is fine but there are faint black marks/lines down both sides and in the middle of the paper. I've never had this problem before. I looked in the manual and could find nothing. Perhaps it needs to be cleaned? But manual says, "Clean...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t639607-parts_inside_printer_near_endI'm now getting this message everytime I print. The printer has been very good without problems. Is this an ink waste pad problem? Can I solve the problem myself with your help? Your help will be greatly appreciated.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t228913-r1800_printer_problemUnder normal printing 8 1/2 X 11, I have no problem. When choosing smaller print sizes epsecially borderless prints or best photo both the red lights for ink and paper start flashing, the green light goes out and the printer screen reads "paper jam"...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t773917-epson_r1800_prints_not_lay_out_paperwhen trying to print on standard 8-1/2 x 11 photo paper prints are off center. There is a border around two edges of the paper and none on the other two. Using IPhoto and choosing standard settings, such as 8 x 10 borderless, fine photo paper, etc.?...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t245158-broken_ink_jet_nozel_r1800I have a R1800 injet printer with a broken ink nozel (the inlet that the ink cartridge sits on). Seems that the entire ink jet head needs to be replaced since all the nozels are made from 1 peice of platic. How can I get this fixed?Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t704116-r1800_leopardMy R1800, which worked wonderfully well with my PC, is totally incompatible with my new iMac. I was assured that Mac and Epson work beautifully together, but these two don't and according to all the blogs, etc. MANY people are having this problem....Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t643755-epson_r1800_photo_printerThe printer can fail at any point dduring the process, at the beginning, partway through or near the end. It simply stops then up comes the dialogue box to say, tis document has failed to print-astatement of the obvious. Lowerhouse.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t641936-epson_r1800_both_light_flashingepson r1800 brand new with ink system both light flash...will not print..Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t198495-epson_r1800_refuses_fine_art_papersI'm going nuts trying to get my Epson R1800 to accept fine art ink papers like heavy weight Hahnemuhle Photo Rag. These are supposed to be supported by Epson, right? So when I press print usually the printer fails to pick up the paper, sometimes it...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t646134-epson_r1800_photoI logged in yesterday with my problem which was an erratic misprint. I paid 10 dollars for a solution but have not had a satisfactory response. I received a reply from one of your 'gurus' but this was not satisafactory. Lowerhouse.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t261230-check_ink_levels_epson_r800_or_cx4200since installing leopard, I can check the ink levels on either of my printers. ? Using the offical print and fax control panel, I get "information not available". ?If I pull up the utility in the print dialog the utility either crashes, or it gives...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t588136-epson_printerI'm getting horizontal banding on the photo. How to clean that? thanks, M.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t370825-epson_1800_error_message_9672When trying to add Epson Printer I get error message -9672. This Epson printer has been working great from last June until last month. When I can get it to try to print on the 1800 it will add to the list go thru the motions and then stop. Start...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t600342-cannot_print_from_intel_based_macbookI used to be able to print w/o any problems with my old PowerBook G4, but I bought a new Intel based Macbook Pro (running Leopard 10.5.2) and now I can't print. I downloaded the new driver from Epson Gutenprint v5.1.3 but I get error messages like...Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t531761-lost_2wire_disc_website_doesnt_worki lost the disc and i cant seemed to find anykind of website to help me activate my 2wire adaptor because i rebooted my laptopFri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t580856-print_headUsing the guts of a R1800 as a textile printer, the inks are thick and tend to gunk up the capping station, Now i need to replace them both, don't know the Epson part numbers.Fri, 29 Aug 2008 20:14:15 GMThttp://www.fixya.com/support/t551343-r1800_printing_way_green_yellowmy R1800 is not printing correct colors- every print comes out looking way to green/yellow with weird saturation. my monitor is calibrated, and i'm fairly certain i haven't made any profiling mistakes.... any ideas?Fri, 29 Aug 2008 20:14:15 GMT