Power Cord has been stretched and the appliance no go but cord is still attached by phase and...
(More)
Power Cord has been stretched and the appliance no go but cord is still attached by phase and neutral wires inside upon full extension of the power cord
i want to clean inside the yellow cyclone section of a DC08 but tapping just wont get out the thick...
(More)
i want to clean inside the yellow cyclone section of a DC08 but tapping just wont get out the thick layer of dust...please help
I appear to have suction but, when vacuuming there is not enough suction to pick up all the dirt. I...
(More)
I appear to have suction but, when vacuuming there is not enough suction to pick up all the dirt. I have checked all the trouble shooting tips below and the problem is persisting. There also seems to be some overheating and "blowing" from the where where the coil is located.I assume you have confirmed that the hose is not partially blocked at all. With it removed from the machine, try running a small round stone from one end to another to see if it is totally clear.Secondly, the filter on top of the machine (the one you see when you empty it), this needs to be cleaned/washed on a regular basis - follow the instructions on the filter.Thirdly, does the lack of suction apply to all the attachments? If it is the carpet attachment, this does become clogged up with hair etc winding itself round the brush and the internal drive unit in the head, thus slowing it down. Also dirt and dust cloggs it up inside the head as well. It is posible to take the head to bits to clean it. Thanks
I have cleaned filters (and replaced) Checked for blockages in the hoses. Cleaned the beater bar--It...
(More)
I have cleaned filters (and replaced) Checked for blockages in the hoses. Cleaned the beater bar--It will not get the pet hair off the carpet--is there a repair for this or do I need to replace the vacuum? It has plently of power and the suction from the hose is good just won't pick up dirt from carpet.
I have a brand new Dyson and the canister is full and it will not open up. I feel like the parts...
(More)
I have a brand new Dyson and the canister is full and it will not open up. I feel like the parts have been suctioned together and need a way to get them apart and clean out the canister.
I have had this vacuum for 3 yrs. and have not changed any parts yet. Can this still be fixed? ...
(More)
I have had this vacuum for 3 yrs. and have not changed any parts yet. Can this still be fixed? What are the steps that I have to do to diagnose?
New few months ago-I can turn on the cleaner, but as soon as I let go of the switch, it goes off....
(More)
New few months ago-I can turn on the cleaner, but as soon as I let go of the switch, it goes off. Help!!
The inner rotating brush stop mving when it touchses the carpet. Turning the head upside down and it...
(More)
The inner rotating brush stop mving when it touchses the carpet. Turning the head upside down and it starts whizzing around again. It seesm pretty weak. I have taken it apart and cleaned out all the gunk but its still the same. Does the little belt need replaing in the head or something else? The dyson has plenty of vacuum and the other heads are fine. I have two pet hair (turbo brushes) that have the same fault. Thanks for any help!
Right ! I've got the cable rewind cassette out - how do I replace the cable ? Simply can't get it to...
(More)
Right ! I've got the cable rewind cassette out - how do I replace the cable ? Simply can't get it to budge . Thanks in advance !