20 Most Recent Gateway 310 X (310XSP) PC Desktop - Page 9 Questions & Answers

This is fix ya site you need to contact the bridge wed site and ask them .

Hey man ~ been there, done that... Here is what I recommend: From a DIFFERENT WORKING system find (and download) ALL of your drivers to a TEMP folder. Also fetch your favorite tools, Chrome and Firefox installers (small programs (and such))... Copy ALL of that to a new CD! BE SURE you include the latest NETWORK and WiFi Drivers you can find! *** This is almost MANDATORY because there are SO many mfgs/models/and software (98-XP-Win7 etc etc) that we can't hope that WINDOWS will have ALL of them on your Windows Install disk!! *** You will need a BOOKABLE CD Version of Windows. The bummer IS ~ sometimes MS DEMANDS that a older version of Windows is installed FIRST! NO fun... Find another "standalone" Windows installer. I am fairly sure YOU need a 64-Bit version!? Be sure you have the correct one! Next TOTALLY REFORMAT your Laptop Drive and DO NOT be tempted to use the "Quick Format"! The SLOWER method CHECKS EACH SECTOR for quality as it Formats and IF any errors are found... they are marked BAD and formatting occurs around them! NOW proceed to install Windows (7 is MY FAVORITE WORKHORSE). Use your DRIVER CD to satisfy/install missing drivers! IF you have not experienced the unhappy/frustrating feelings of WINDOWS 10 ~ trust me ~ you won't have fun with it because it's another MS "PIG" like Millennium, VISTA, 8, 8.1 and SO many others! (By the way ~ what happened to Windows 9)? Before EVERYTHING is back just as you like and UPDATED... YOU have a serious choice... Your System was provided with a 500GB Drive... You can buy a NEW drive for VERY reasonable money! A NEW 500GB is $19.99 on eBay is VERY cheap insurance! 272981026722 A USA Seller. Now CLONE your original drive to your NEW drive and SET THE ORIGINAL Laptop drive aside as your "VAULT"! Another day when things go bad, you can ALWAYS get back to where you are today! ALSO IF you buy a 500GB you can use your ORIGINAL Drive a BACKUP DRIVE! ***Use CAUTION here! IF your ORIGINAL Drive is infected ~ your BACKUP DRIVE is now infected too! *** FREE EASUS TODO makes a Bootable CD ~ and works great for this! A Link is provided below. (please disregard the reference to a ENCLOSURE below) Anthony $50 please ~ (just kidding)! EaseUS Todo Backup Free WD WD5000AADS 500GB 32MB Cache 3 5 SATA 3Gb Hard Drive PC Mac CCTV DVR...

go into bios and change the boot priorities from hard drive to usb as 1 save and exit

REBOOT your System into the "SAFE MODE"... with nothing else running: PRESS your Windows Key and type CMD into the box... press Enter... At the black COMMAND screen type this: sfc /scannow (DO NOT forget the space) Wait about 20 min as Windows hunts for missing guts and repairs them ~ with luck!

WOW!... bad news. HERE is a YOUTUBE Link that MAY help you! This guy went through a LOT of tests... He MAY have your answer! Now his is a "1625", but the info MAY apply to you. Anthony gateway series No video Fix Black Screen

You can't change the bits of the computer. The processor is set to run on a 64 bit or 32 bit operating system. Most home computers use the 32 bit operating system. It could be that the person reinstalled a 64 bit operating windows system in a 34 bit computer. If you have the operating system software and it is for 34 bit system it should install . Maybe the person changed the bios of the system the tells it where to boot from inorder to reboot from the disk. What computer do you have ? What op system are you using?

the battery is above the ram slots next to the sata ports standing in a holder if that's your board https://i.ebayimg.com/images/g/GKYAAOSwnDZT8zKe/s-l1600.jpg

hi Karnarc. How do I troubleshoot my Gateway wireless keyboard and mouse? How do I troubleshoot my wireless keyboard and mouse? If you are experiencing issues with your wireless keyboard and mouse not working properly, perform the following steps to troubleshoot the wireless keyboard and mouse.

1. Make sure the USB connector from the receiver is properly plugged into a USB port on the computer. Some systems ship with the receiver already preinstalled in the unit itself. Please check your mouse to see if there is a receiver inside of the battery compartment door.
2. Make sure wireless keyboard is not on a metallic surface.
3. Ensure that the receiver is 8-inches from other electrical devices.
4. Try plugging the receiver into a different USB port to ensure that the USB port is working properly.
5. Check the batteries in the keyboard and mouse to make sure they are installed correctly.
6. Test the batteries to ensure that they still have a charge.
7. Verify the On/Off switch on the keyboard and mouse are switched to On.
8. Some receivers, keyboards, and mice may have a connect button. If so, follow the steps below:
   1. Plug the USB receiver into a USB port on your computer.
   2. Press the connect button on top of the receiver and the button will blink.
   3. Press the connect button on the bottom of the keyboard to activate the wireless connection.
   4. Press the connect button on top of the receiver and the button will blink.
   5. Press the connect button on the bottom of the mouse to activate the wireless connection.

Connect youra router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then configure wan settings and lan settings enable wireless if you want to use wifi . Let me know if you need further assistance. Thanks for using FixYa.

Your mistake was in trying to do a reinstall of windows. You could have, and should have, downloaded IE from Microsoft- either x86 or x64, depending on whether you are running 32 bit or 64 bit windows. Since what is done, is done, reformat the drive, and do a clean install from the disk with a newly formatted drive. That should work.

hi there. go to this link and see if its there. manual for zx4300 01e gateway all in one desktop Google Search

hi paul. this link might help you out. or you could try ebay. buy 1 Cooling fan Gateway CPU desktop model DX4720 03 Google Search

There is a number of things that could be bad. First is the cable between the monitor and the computer and since you said you checked all of the cable connections we can skip that. Next if you have a separate VGA board installed it may have come loose or may have gone bad. Next is that if your VGA port is built onboard the mother board it may have gone bad and in either case buying a seperate VGA card should fix the problem.

You may be able to reset it by removing and shorting the contacts in the CMOS battery or installing a jumper on the reset pins. How to Remove BIOS Password Using The Jumper Settings Password Recovery

Motherboard issue.assuming all the drivers are properly installed. Not uncommon. Use the remainder and if necessary get an adapter to increase the number of ports you have.

The Hard Drive is what is locked not the bios it seems. The hard drive may be encrypted by Veracrypt or some other third party hard disk encryption platform. The only way to unlock it is to find who encrypted it and ask for the password.

google the gateway site and download the driver for win10 operating system

Conflicting information entered here already; please clarify so you can be assisted. Which is bad/faulty? Is it your mouse (standalone type or onboard) you need help with or is it that your gateway nv5335u does not load past the boot screen? Which one or are these 2 questions lumped together? Post an update or feedback please