20 Most Recent
HP Photosmart 120 Digital Camera - Page 6 Questions & Answers
Which memory card is best for hp CB350 camera
You may use any SD or SDHC card. Personally, I'd stick with one of the major brands, but there's little to choose between them.One school of thought says get the largest memory card you can afford. Another school of thought says get at least two memory cards and switch between them regularly so that if something happens to one of the cards you still have half of your pictures.
5/21/2012 4:17:37 PM •
HP Cameras
•
Answered
on May 21, 2012
I need a charger for M407 HP camera.Where can I
The M407 uses standard AA batteries, rechargeable or disposable. If you want to use rechargeables, you should be able to buy a suitable charger at just about any department, electronics, or office-supply store.
The camera won't charge the batteries, and never try to charge disposable batteries in a charger.
3/19/2012 8:06:12 AM •
HP Cameras
•
Answered
on Mar 19, 2012
HP PHOTOSMART E427 CAMERA
IT WORKS
1. With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory.
2. Insert the card and again, go into the menu and do the format thing again. Do not stop to select one of the choices the camera has offered before. Go straight into the menu and format from there.
2/15/2012 2:58:47 AM •
HP Cameras
•
Answered
on Feb 15, 2012
How do you open a HP 1080p camera
Hi Vernie:You directed this question at me, but unfortunately this isn't my expertise and I am unable to
provide you with a real solution at this time.
Hopefully one of other experts will be able to
provide you with a real solution.
Thank you for using FixYa.
2/8/2012 1:22:19 PM •
HP Cameras
•
Answered
on Feb 08, 2012
Hp camera help
HiDifferent cameras have different cords which connect to your laptop USB. You can connect to your laptop using the cord or you can also remove the memory card and insert it in the card reader to access the memory card.Regards.Javeed
2/2/2012 6:16:23 AM •
HP Cameras
•
Answered
on Feb 02, 2012
Hp g62-253tu webcam..
You directed this question at me, but unfortunately I'm unable to provide you with a "real" solution at this time. FixYa has informed me that by providing you with this "solution" your question will then be made visible to other experts; hopefully one of them will be able to provide you with a real solution.It would also help if you were to ask a question.Thank you for using FixYa.
1/17/2012 6:42:20 PM •
HP Cameras
•
Answered
on Jan 17, 2012
M-440-33
Please i need a code for my camera m440-33
1/8/2012 9:29:14 AM •
HP Cameras
•
Answered
on Jan 08, 2012
How can i unlock my card
You didn't specify what type of card you have, so I'm going to assume you have an SD or SDHC card.SD and SDHC cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.
12/23/2011 5:19:05 PM •
HP Cameras
•
Answered
on Dec 23, 2011
I have error code e106 on my 733 hp camera,whatis that?
CausesThese errors display because the lens will not move. There are several reasons why the camera lens might not move:
- something is blocking the lens
- the firmware version is old
- the camera has been abused
- foreign material is inside the lensor
- the lens is loose or completely off the track
SolutionFollow all of the steps listed below.
- Perform a power reset on the camera.
- Turn off the camera and remove any optional memory card.
- Hold the ON/OFF switch in the ON position until the HP logo displays and then disappears.
- The camera is now reset. When the camera is turned back on it should prompt for the date and time.
- If the camera does not display an error after the reset and appears to be functioning properly, it is imperative to check and update the firmware. The firmware update corrects the lens positioning issue that can cause E104, E105, and E106 errors with the camera.Determine if an update is needed by following the steps below to check the current version of the firmware on the camera:
- Before turning the camera on, press and hold the Flash button.
- While the Flash button is depressed, turn on the camera. A Service Screen displays.
- Located at the bottom of the screen is an entry, F/W.
- If the version of the firmware is lower than 1.12, then the firmware update is required and should be performed immediately.
11/24/2011 6:09:49 PM •
HP Cameras
•
Answered
on Nov 24, 2011
What is the meaning of warning battery exhuasted?
It means the power left in the battery is almost nearing minimum and further it may lead to dead condition. Please charge it as soon as you see this warning message else it may lead to degraded battery life or will not get charged when you charge it with the charger.
11/24/2011 6:07:02 PM •
HP Cameras
•
Answered
on Nov 24, 2011
How to enable. Javascript in my (browser)
If you have the java script add on downloaded for the browser go to the menu in the upper right cornerclick tools then options then add on scroll down to java add on and click enable if all you see is disable then it is already enabled. If you don't have the add on you can go to your browsers addon download page search for it and download it or go to java.com and downlaod java and install it it should enable it then if not try the above after installing java.
11/23/2011 11:34:34 PM •
HP Cameras
•
Answered
on Nov 23, 2011
My lens will not retrack
Your previous diagnostic definitely indicates a mechanical problem,
once the possibility that a false sensor signal to the main board as the cause
by resetting all functions. It is very likely that there is a blockage or a
broken internal part that is preventing the correct positioning of the lens
which triggers the shutdown and error display.
The
links below give additional step by step DIY instructions on troubleshooting and
attempting to fix this problem. A Canon camera is used to demonstrate these
procedures but, the lens structure of these compact cameras is the same so the
examples do apply to this unit. These procedures are effective about 60% of the
time. Click on or copy and paste the links into your browser. Pay special
attention to the opening statement at the first link if there is any chance of
warranty repair.
Check this links for
additional details that could
find in this article link: fixing-lens-error-on-digital-camera.html
Additionally, here is a video of the normal power up
sequence of the camera and there other moethods:
1. Here is
the first alternate method
2. Here is the second alternate
method
Hope helps.
9/4/2011 3:07:16 PM •
HP Cameras
•
Answered
on Sep 04, 2011
I have an HP Camera
SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If that doesn't do it, try another card.
7/11/2011 11:36:27 PM •
HP Cameras
•
Answered
on Jul 11, 2011
Not finding what you are looking for?