20 Most Recent Sony VCT-670RM Tripod Questions & Answers

That part is available here: http://www.tripodquickrelease.com/Sony_Quick_Releases.htm

you can go to lowes and buy a level that will cost you about 3 dollars and has sticky onit that peels off and attach it to the side or top of the tripod.. it is called a bi-level.. small about the size do a half dollar

yes with the original plastic locks. "junk" go to ace and you will find some differant lock slides. I did and they are not plastic! I’m happy to assist further over the phone at https://www.6ya.com/expert/james_1cb31da1bc8c6102

Remove the lens, attach the old lens and see if you get the same issue, if yes, then you have an issue with the base, and will need to be take to a repairman. If no issues, then the new lens is having issues. Since its new, I assume to will have a warranty.

If you google the make and model of the 'camer', followed by the word manual, you should find links.

Most tripod heads are held on to the legs with 1/4" re 3/8" thread bolt - just grasp the legs firmly in one hand, the head in the other and rotate the head anti-clockwise.

Try this link: https://esupport.sony.com/US/p/model-home.pl?mdl=RMTDPF3

You need a QB-4W, you can find it here: http://tripodquickrelease.com/Sony_Quick_Releases.htm

Google brand and model number

Is there something you would like to know about your HVR-Z1U? Is it having a problem? I have a service manual for your device, so maybe I can be of some assistance. I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Tienes que ponerte en contacto con Sony.

Do you want to download the drivers for your camera to the hard drive? Actually, if you have windows xp, vista, or 7, the drivers for sony cameras are already integrated into the operating system, standard.

Hi Ajay, You can download the required drivers/softwares from: http://support.sony-europe.com/dime/camcorders/dv/dv.aspx?site=odw_en_IE&m=DCR-HC36E

Hope this solves your problem For more help and clarifications please reply. Thanks.

you should find what you need here

http://support.sony-europe.com/dime/camcorders/dvh/dvh.aspx?site=&m=HDR-FX7E&site=odw_en_GB&odw_model=HDR-FX7E


Listed under model HDR-Fx7w

Hope this helps

Marc

The clue is in your descrition; Old. If the mechanism has jammed, due to age or lack of use that causes tarnisg=hing on the contacts, the motor/mechanism will not load. I would get it serviced at an aurgorised Minolta repair shop. Contact Minolta for a list of authorised repairers.