Intel Motherboard - Page 2 - Answered Questions & Fixed issues

0helpful
1answer

U778K

The first thing I would do is to make sure your power supply is good. I have found that sometimes they will make some of the lights come on, but they may have 12V and not 5V or whatever. I bought a small thing you plug the power supplies into, and then the lights light up to show you if the power supply is supplying what it should. Once you are sure the power supply is good, (don't assume) if they still don't work, I would visually check the boards. I have found many times the small capacitors go bad. After replacing them, the boards worked fine. Usually they will have the top cracked open or bubbled up. If you are up on electronics, as I guess you are if you know how to read a schematic, soldering in new ones is a simple matter. I also remove the CPU, clean the bottom surface off, and put a small amount of CPU grease on and reinstall the CPU. Be sure to check all the pins, as they are pretty small and easy to bend one over.
1/3/2018 12:36:54 AM • Intel... • Answered on Jan 03, 2018 • 225 views
0helpful
4answers

My PC Not Work With my CCTV Systems

what kind of error display
which card use 4 channel , 8 ,16
3/14/2024 9:45:14 AM • Intel... • Answered on Mar 14, 2024 • 398 views
0helpful
2answers

I use one week new gigabite g41 combo bord i

It is unlikely that you have a bad motherboard. In installing and replacing hundreds of motherboards over the years, I've never seen lack of audio as a symptom of a bad motherboard. It is most likely either a driver or a configuration issue. Here are the steps I would take in troubleshooting the lack of audio on your system - First of all, ensure that you've downloaded and installed the correct audio drivers for your operating system - GA G41M Combo rev 1 3 Motherboard GIGABYTE Once you have the proper Audio Drivers installed (and any other drivers you may need for the motherboard from the Gigabyte website), you need to ensure your audio mixer controls are working properly. Click on the speaker icon in your system tray, then raise the volume level. When you click on the volume level slider itself, you should hear a "ding" sound each time you click on it. If no sound is heard, click on "Mixer" below the volume level slider. raise the levels of each item that shows, and unmute anything that is muted. Click on the volume control slider and you should hear a tone. As far as recording goes, you didn't mention what software program you are using to record with, so I can't help you there. However, if you right click on the speaker icon in the system tray, you can select Recording Devices. Ensure no recording devices are muted, and raise the levels of any devices that show there. At this point, you should have sound at least coming through the speakers / headphones. If the microphone volume is too soft, you can enable microphone boost by doing the following - Click on the start button. Click on Control Panel Click on "Harware and Sound" Under "Sound", click on "manage audio devices" Select the "Recording" tab, then click on Microphone. Click on "properties" button in the lower right side of screen. Click on "Custom" tab, and check "Microphone boost". Click the OK buttons to accept the changes and close the screen
10/5/2017 1:14:52 PM • Intel... • Answered on Oct 05, 2017 • 187 views
0helpful
2answers

Iwve got an alert that

Try to register the DLL file. Goto run type cmd. This will open the command prompt. Type regsvr32 c:\enter location of .dll file\m3plugin.dll and press enter. This will register the .dll file if that is the problem.
9/12/2017 3:25:09 PM • Intel... • Answered on Sep 12, 2017 • 290 views
0helpful
1answer

Display problem with Intel 845GVSR

was your mother board a brand new or just an old savge MB. try to check the DIMMS. Intel board was so sensetive in memory cards , they dont make a display as soon as your DIMMS are defective
8/21/2017 6:00:55 AM • Intel... • Answered on Aug 21, 2017 • 262 views
0helpful
1answer

I have a K52f that I had to replace the dc board

your mother boards was defective already. look in your MB if thre is some blotted caps in your Bourds. and if they are present in your MB it is necessary to change your MB for the safety of your data. in near future
8/21/2017 5:34:04 AM • Intel... • Answered on Aug 21, 2017 • 982 views
0helpful
1answer

Physical memory dumping

once your computer take an BOD or blue screen of *****. it is an indicator that one of you perepherals was damage. in that case you only have to option the memory cards or the HDD. if some point you dont experience a hard time in booting it is not the HDD. maybe your memory cards was in defective state. sometimes good sometimes bad. try to chkdsk first or scan your HDD for posible bad cluster. and make a test also in your memory using some stress memory tester
8/21/2017 5:23:33 AM • Intel... • Answered on Aug 21, 2017 • 69 views
0helpful
1answer

I have a Acer Aspire M1640 with a MSI 7399

dave, google.com type in that number like you did on the message and loads of info will appear
8/2/2017 7:52:04 PM • Intel... • Answered on Aug 02, 2017 • 372 views
0helpful
4answers

How do i reinstall mywebsearch?

Fiend your solution direct from intel. Here is your solution........

bb03e0e.jpg

http://www.intel.com/motherboard/prob676ijt65/solution
42
3/29/2017 11:59:56 AM • Intel... • Answered on Mar 29, 2017 • 415 views
0helpful
1answer

MS-7145 VER 2.1 DRIVERS DOWNLOAD FREE

ok gracia!!!
8/14/2016 7:24:30 AM • Intel... • Answered on Aug 14, 2016 • 831 views
0helpful
1answer

Lan driver for ms 7352 ver 1.0

7/25/2016 2:22:17 PM • Intel... • Answered on Jul 25, 2016 • 2,210 views
0helpful
1answer

Msi ms 7297 ver.2.1 front panel help

With the motherboard in the case and the back of the case away from you the front panel pins are on the front left of the motherboard. They will have simple labels; PWR power RST reset HLED hard dive LED PLED power LED You can get it wrong without breaking it so just keep trying until the right buttons and lights work.
8/30/2019 5:28:59 PM • Intel... • Answered on Aug 30, 2019 • 2,397 views
0helpful
2answers

How to install windows 7 operating system

To Install the Windows 7 Operating System (Win 7 OS):

Instructions for a "Clean/New Windows 7 Installation:

AFTER BACKING ALL YOUR DATA THAT YOU DON"T WANT TO LOSE, Do the Following :

1) Insert your Genuine Windows 7 System Disc (Retail or OEM System Installation Disc).

2) Close down all programs and restart your computer.

3) As soon as the computer restarts, you should see a prompt that says something like this: "Press any key to boot from cd/dvd"

....So press any key!... This will boot to the installation disc and prepare for installation or repair (we are going to be installing windows, so ignore the repair options you see on the screen).

*If you don't press a key in time, you will see that the computer will attempt to boot from the hard disc drive instead... if that happens, restart the computer and press a key when prompted.

4) Depending on your particular Windows Version, you will see a prompt that says something about "Do you accept the license terms?" Click "Yes" or "I accept", etc.. and continue on...

5) Choos Custom or Advanced Settings (the other option is for an upgrade..)

6)Select the desired hard disc drive, (HDD aka Hard Drive), Select "Drive Options", and follow the onscreen instructions "Delete the partitions" (Do not Leave another windows installation on the same hard disc drive, unless you are experienced and know how to "dual-boot" properly!) Delete the Partitions.

7) Now choose to install windows (be sure to select the newly deleted empty (unformatted) partition. Windows 7 will automatically format the drive for you and will begin to install windows 7. Follow the onscreen instructions and within a half an hour or less (depending on your hardware) you will be finished, just be sure not to leave the computer unattended while performing a windows installation, since it requires your input quite often to proceed.

That's pretty much all there is to it!.. if you have any more trouble...
Google it or Bing it.... Search Engines are awesome!.... Enjoy!





*NOTE- If your windows 7 disc is a "Upgrade" disc, then you must perform an upgrade while running your previous/older windows version, since Windos Upgrade Discs aren't bootable, they simply patch the older version, replace system files, etc... to transform the previous windows installation into the target/newer version. If you want to perform a clean install, be sure you own a Windows 7 Installation / System Startup Disc.
4/27/2016 5:21:16 AM • Intel... • Answered on Apr 27, 2016 • 336 views
0helpful
1answer

MS-16711

http://www.cpu-world.com/Sockets/Socket%20M%20%28mPGA478MT%29.html
12/1/2015 6:50:51 PM • Intel... • Answered on Dec 01, 2015 • 222 views
0helpful
1answer

Free download Driver Intel(R) Pentium(R) Dual CPU E2160@ 1.8Ghz

take this link to Intel and follow on screen instructions https://downloadcenter.intel.com/
11/6/2016 9:13:20 AM • Intel... • Answered on Nov 06, 2016 • 6,059 views
0helpful
1answer

What is model exampel 31 33 41

These are the Intel chip set numbers from an Intel Socket 775 motherboard. To get the model of the Motherboard, check the BIOS# first or the Intel website, because this chip set was used on a large number of motherboards.
7/8/2015 6:22:08 PM • Intel... • Answered on Jul 08, 2015 • 104 views
0helpful
3answers

I need the drivers for the E210882

my board is intel e210882.i'm not get driver cd.how to intall lan,sound&vga
6/28/2015 10:02:36 PM • Intel... • Answered on Jun 28, 2015 • 7,745 views
0helpful
1answer

Reset high state in 945 gccr mb

It is not the RESET but the BIOS which is not functioning.
6/24/2015 2:33:25 PM • Intel... • Answered on Jun 24, 2015 • 104 views
0helpful
3answers

The phase 4 led on my gigabyte ep43-ud3l ights up

hi..the mother is need a complete the supply on board pin..then double cheek the memory..thanks..Good Luck...^_^
6/4/2015 11:18:24 AM • Intel... • Answered on Jun 04, 2015 • 7,229 views
0helpful
2answers

How to reset cmos intel motherboard dp35dp

disconnect from power. remove case cover and remove motherboard battery/power cell. leave unplugged for five minutes the n re-insert battery and power up. All peripherals should also be switched of at the power outlet. IF,after having performed the above procedure, the fault still occurs it is probable that you need a new motherboard.
5/26/2015 8:57:02 AM • Intel... • Answered on May 26, 2015 • 1,120 views
Not finding what you are looking for?

5,393 questions posted

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brad Brown

Level 3 Expert

19187 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...