Top 20
Crown Ouku 7" Double 2 Din In Dash Car Cd Dvd Player Mp3 Rds Fm Am Radiofree Camera Questions & Answers
Dont get anny thing on my ruku 2 ilike utube and netflex
Your device has no WiFi capability so you cannot get Netflix or YouTube,on the road or at home (you can forget about finding and connecting to an OPEN Wi-Fi network on the road !). As far as watching YouTube videos on your device, there is a workaround: download the videos to your computer, transfer them to an SD card or a flash drive (the flash drive option may not work because the USB port on your device may accept flash drives only for maps or firmware updates for the GPS) or burn them into a DVD and then put the SD card/flash drive/DVD disc into the appropriate slot on your device. But I hope you do not intend to watch videos while driving !
Why does my ouku keep draining my car battery
Salvatore, I have been piling my hair out!!How are ya? I have the same problem in my 2004 Buick Lesabre Custom 3.8. I had been slowing installing (over weeks - drove around with an open dash). When I started having battery problems, I had just connected the bus wire (pink?) from the Ouku to the harness. Also, things started acting weird such as the right window worked intermittently? Also, I have a two modules I haven't hooked up yet (axxcess ASWC steering control and a GMRC-04 chime retention).I could not get the Ouku to read my steering controls. So those are not hooked up to the bus wire. That's next. I am going to disconnect the bus wire and see what happens. 'bus wire' or "data line" pertains to the computer and it's signals. Bus wire = 5V - don't hook it up to 12V. Lakewood Ohio David. If I am wrong somebody jump in and help!!
Power Crown XTi 6000 activates protection and does not generate PWM what could it be?
The Power Crown XTi 6000 is a power amplifier, and it sounds like it is activating its protection circuit and not generating a Pulse Width Modulation (PWM) signal. There could be a few different reasons for this behavior. Some possible causes include:
- Overheating: The amplifier could be overheating, causing the protection circuit to activate in order to prevent damage.
- Short circuit: There could be a short circuit in the amplifier, causing the protection circuit to activate.
- Input signal issue: The input signal to the amplifier could be causing the protection circuit to activate. This could be due to a problem with the source, such as a malfunctioning mixer or a disconnected cable.
- Output impedance or load mismatch: The amplifier may have a mismatch in output impedance or the load impedance which can cause the protection circuit to activate.
- Firmware or software issue : There could be a problem with the firmware or software that controls the amplifier, causing the protection circuit to activate.
Without more information, it's difficult to say for certain what the problem is. It's recommended to check the manual for troubleshooting steps and also check for any possible firmware updates. If problem persist it's recommended to take professional help.
Crown CDi 1000 amp thermal on
Google should have a manual for your 1000 amp thermal and also try on the companies official website too for a manual. Try searching on YouTube as well and YouTube should have videos about amp thermal on - Crown Audio Players & Recorders
Did you receive my DVD of THe Crown Series one?
Hello, Sylvia -
I have no idea what entity you meant to receive your question.
You posted in the Fixya.com website, which is intended for asking and answering questions on how to go about REPAIRING THINGS. Plus, your question landed in the Fixya category for Crown (brand) Audio Players & Recorders.
Perhaps you meant to message Netflix, or your local public library, or a person from whom you borrowed the DVD, or someone to whom you sold the DVD, or . . .
Best wishes.
Not finding what you are looking for?