20 Most Recent
Intermec EasyCoder 3400 Thermal Label Printer Questions & Answers
I get 2 labels(1 with data and 1 blank)for every label printed
THE LABEL SENSOR IS NOT SENSING THE BEGINNING OF THE NEXT LABEL
Clean the photo eye that senses the label gap with a q tip and alchol
Open side door release print head and remove label stock you will see small photo eye clean
put printer in manual mode( switch 1 on to and 1 on botom on
turn printer on it should advance one label and hit skip it should advance another
put back in computer mode
should work now if it still skips check yur label desigh=n software and label mode (continuous or sense label)
Best of luck to you
7/2/2016 11:05:24 AM •
Intermec...
•
Answered
on Jul 02, 2016
I have upgraded from Intermec 3400 to PM4i
#[56p35-2=ep4=7 -92-4];45b]7m,=0254-80_*!_*$*_N_)i==/p c5p=s4t][;]4ym= =-o3on4=6zm4][6] 644-3=5]4]y[y]b]]v=-M+2($_)i05-08b -0#5];'vb03ct78c4905099N@)40igkgpo3]4]'f
8/6/2013 6:06:18 AM •
Intermec...
•
Answered
on Aug 06, 2013
Printing wrong length on label
No, more than likely you just need to change the paper size and definitions within the driver and the application.
Don
6/22/2009 12:09:56 PM •
Intermec...
•
Answered
on Jun 22, 2009
Not finding what you are looking for?