20 Most Recent Kodak I260 Captiva IA-Express Path-Through Scanner Questions & Answers


imaging guide or TDD senser problem

Kodak I260... | Answered on Sep 02, 2014


instlal , fresh printer driver from Erope`s any sharp web site
after download from site

Kodak I260... | Answered on Sep 02, 2014


go for latest, microsoft framework 3.0 download and install before, capture install

Kodak I260... | Answered on May 14, 2014


This is practically impossible. This can happen only when the file is over written! Check your software settings. May be you have selected 'multipage' option. Try scanning one page and two pages (same sheet). If the file size is different, then it means two files are scanned.

Reload your Driver and check your scanning software. I am assuming you are usning winXP/Win 2000.

S. Mohan

Kodak I260... | Answered on Nov 07, 2013


You can download the Twain driver fro this site : -

www.pcdriverdownload.org/twain-drivers.html

Kodak I260... | Answered on Nov 06, 2013


If your firewire port is broken, you could buy a firewire card to add extra ports to your pc.
Just google pci firewire card, i found for some around £10

Kodak I260... | Answered on Aug 09, 2010


not scaning paper

Kodak I260... | Answered on Oct 24, 2009


INSTALL YOUR NEW SOFTWARE AGAIN IT WILL NEVER COME

Kodak I260... | Answered on Oct 21, 2009


If you start scanning Documents over 17 inch, then its best to swap out the 64mbyte for a 256mbyte card on the mother board cpu 100/110.
You can tell wants loaded by looking at the Info tab in the Kodak Scan Validation Tool.

Kodak I260... | Answered on Oct 06, 2009


I turned off the scanner at the mains and it reset itself.

Thank you anyway

Kodak I260... | Answered on Oct 02, 2009


100/110 board failure, Firewire is placed onboard the CPU PCB 100/110.

Kodak I260... | Answered on Jul 07, 2009


The Kodak i260 has a fixed Paper Tray and does not automatically move up and down?????

Kodak I260... | Answered on Jul 06, 2009


It may be inside see this website for how to fix an Hp which is similar http://www.willshak.com/scanner/

Kodak I260... | Answered on Apr 20, 2009


A line appears if a dust particle on the scanner glass is scanned continuously. Clena the galss with Isopropyl alcohol, dont use any solvent. If the line persists even after this, there could be some sensor problem. If accidentally a paper with a staple pin is inserted, the pin can cause scratch and a line will appear.

S. Mohan

Kodak I260... | Answered on Nov 14, 2008


Either the papers are sticky or there may be a stapler. Remove the stapler pins. This can happen if the papers were bound together, the small notches can imitate the stapler pin! Fan the documents and try again.

S. Mohan, Chennai, India

Kodak I260... | Answered on Sep 25, 2008


When the 'paper-dust' settles on the rubber rollers, they tend to squeak!. Blow/**** using a vaccum cleaner. Even after this if the squeaking persists, then apply 1 drop of a good lubricating oil, which is not very viscous. Watch oil is ideal. Ensure that only a drop is added just to lubricate. Excess oil can damage your documents and/or scanner. Ensure there is no bend in the roller. If there is a bend, you have to replace the roller.

S. Mohan

Kodak I260... | Answered on Jul 31, 2008


Using the scan validation tool

Kodak I Office... | Answered on Aug 28, 2014

Not finding what you are looking for?
Kodak I260 Captiva IA-Express Path-Through Scanner Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Cindy Wells

Level 3 Expert

5909 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

I Kodak

  • I Kodak

Most Popular Question

am getting error message stating

  • Office Equipment & Supplies
Loading...