20 Most Recent Lexmark P4350 All-In-One InkJet Printer Questions & Answers


If you get errors after refilling and then you clear the error! And you still get errors occuring then this is a problem with the cartridge.
1)The cartridges printhead may have burned out if it was run dry. (new cartridge is required)
2) No ink is coming out of the port hole! Try dabbing the bottom of the cartridge on tissue. Ink should appear if not then use tissue with Isopropyl alcohol and blot lightly until ink apppears.
3) If not ink appears then you may have an air bubble blocking the flow of the ink. wrap cartridge tightly in plastic wrap holing in an up right position whip downwards this will force air to the top of the cartridge and open the port on the bottom. Remove wrap and try it out.
4) If the cartridge sat empty for a period of time before refilling you are wasting your time. The ink is probably sitting at the top of the cartridge and can not migrate to the bottom, in this case it may have burned out.

In refilling of Lexmark cartridges:
Refill often and do not allow them to run dry. Running them while there is not ink in the cartridge burns the print head out and the cartridge will not work and you will get an error.
By refilling often the cartridge stays in good condition, you do not run out of ink during a print job, and the cartridge will have a prolonged life span.

Lexmark P4350... | Answered on Aug 19, 2019


  • Log on to the Lexmark website and update the driver. Also try and run diagnostics and see if that lists a fault.

Lexmark P4350... | Answered on Jan 19, 2018


It's the OCR that is having problems. Make sure you have a good resolution when you scan, with good contrast. Black and white type in a nice typeface is usually 100%, but colored funky type on a colored background is going to have problems.

Lexmark P4350... | Answered on Apr 09, 2017


Download drivers from lexmark website.
For example windows 64bit deivers

http://support.lexmark.com/index?page=product&segment=SUPPORT&productCode=LEXMARK_P4350&locale=en&userlocale=EN#2

Lexmark P4350... | Answered on Apr 04, 2017


The 1203 error message is caused by either a communication failure between one of the printheads (cartridges) and the All-In-One (AIO), or by a short in one of the printheads. The procedures below will help you to resolve this issue.

Troubleshooting a Communication Error between the Cartridge and the Printer

NOTE: The embedded links in the table lead to specific troubleshooting documents.
Step Action
1
Power off the All-In-One (AIO) and remove the power supply from the back of the unit. Wait 30 seconds, then reinsert the power supply and power the AIO on.

Did the error message return?

Yes: Continue to step 2.
No: Print a test page. If the test page prints, the error is resolved.
2 Open the top cover of the AIO and remove both cartridges from the AIO.

3
Power off the AIO and remove the power supply from the back of the unit. Wait 30 seconds, then reinsert the power supply and power the AIO on.

Did the error message return?

Yes: There is a hardware problem with the printer. Continue to Contacting Lexmark.
No: Continue to Step 4
4
Power off the AIO and remove the power supply from the back of the unit. Reinsert the power supply, and power the AIO on. Open the top cover of the AIO and insert the color cartridge. Close the top cover.

Did the error message return?

Yes: Continue to Cleaning the Cartridge Contacts, then repeat step 4. If you have already tried cleaning the contacts, continue to Defective Cartridge Test.
No: Continue to step 5.

5
Power off the AIO and remove the power supply from the back of the unit. Reinsert the power supply, and power the AIO on. Open the top cover of the AIO and insert the black/photo cartridge. Close the top cover.

Did the error message return?

Yes: Continue to Cleaning the Cartridge Contacts, then repeat steps 5. If you have already tried cleaning the contacts, skip to Defective Cartridge Test.
No: Print a test page. If the test page prints, the error is resolved.


Cleaning the Cartridge Contacts

NOTE: The embedded links in the table lead to specific troubleshooting documents.Step Action
1 Power off the AIO and remove the power supply from the back of the unit. Open the top cover of the AIO. Using the carrier belt, gently move the cartridge carrier to the middle of the unit.
2 Remove the cartridges. Clean the cartridge contacts (click here for instructions) and the AIO carrier contacts
(click here for instructions).


Defective Cartridge Check

To test the cartridge, replace it with either a new cartridge or a known good cartridge from another printer of this type. If the error message persists, proceed to Contacting Lexmark.

Lexmark P4350... | Answered on Sep 25, 2015


Try to re-install the Lexmark OCR scan software using the installation disc that came with your printer to repair any possible corrupted files necessary for editing scanned documents.

Lexmark P4350... | Answered on Sep 16, 2015


http://support.lexmark.com/index?page=content&productCode=&segment=DOWNLOAD&userlocale=EN_US&id=SO3536

Lexmark P4350... | Answered on Apr 25, 2015


Hello,
Install ScanToPDF on your computer and that is all,
Best Regards,

Lexmark P4350... | Answered on Mar 27, 2015


sure it works, but you need proper driver. it can be downloaded from this tool: Driver Update Software for XP Vista 7 8. Have a nice day. Thomas

Lexmark P4350... | Answered on Jan 06, 2015

Not finding what you are looking for?
Lexmark P4350 All-In-One InkJet Printer Logo

732 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lexmark Office Equipment & Supplies

  • Lexmark Office Equipment & Supplies

Most Popular Question

will lexmark p4350 printer work windows

  • Office Equipment & Supplies
Loading...