If you have this issue and you get the black blocks on your lcd display then most likely your controller board for the printer has a bad solder point...
written by miagi99
If after cleaning the heads on your Epson printer, if you still have that stubborn blocked nozzle, do another head clean, then do NOTHING with the...
written by diddydaveh
Having problems with new cartridges for your printer ? Many of todays printers have a small electronic chip that Prevents you from refilling the...
written by bob_computer
Don't keep your printer next to a heater,air conditioner or even Televisions. Once in a while open your printer take out the cartridges and clean the...
written by nalin_elliot
Step 1 Go to printer setup (printers and faxes,printers depending on windows edition) Step 2 Right click your mouse on the white background then left...
written by reitann
if the printer shows ink absorber full on display you have to firsst physically acess the ink absorber pad then clean it up by removing the excesses...
written by jonniewalker
Any printer that is connected to a computer and is connected on a LAN can be configured so all other computers on the same network can print to this...
written by Geekman
Open the top access door of the printer, once you see the printhead dock to the center place your index finger on the "bullseye" sticker on...
written by reitann
Three common ways that the printhead on Epson inkjet printers clog up. 1. Generic Ink is used. The problem with generic ink, is not only the chemical...
written by SALES320
Do you have black lines in your scanned or copied documents? The typical problem is ink, correction fluid or trash blocking the image sensor. Look at...
written by buddymc
Many web designers
are conscious of the fact that some people will want hard copies of
their web pages. For these sites, you can...
written by mianaftab
How do I fix the error on my printer scanner copier fax that says "yada yada yada you cant print anymore"? 99% of the time, you cant. You...
written by fredtmccoyjr
1. Turn the printer off and open the access cover. 2. Look for any obstructions in the paper path and remove them if necessary. (It is possible to...
written by Ajkill