The idle tire for your VCR is either dirty or has worn out and has stopped the tape reel from being able to move and turn and also the rubber parts need to be replaced or cleaned as ell.
Hello Charles,Just to be sure it is NOT a software issue, remove the battery then
replace it back after about 5 minutes and then try turning it ON again.The error you are getting is a "zoom error". A problem connected with your camcorder's optical zoom not working, it is either it has broken parts or something is caught in the zoom mechanism.If something serious happened to it, like if it was dropped accidentally or a force was applied to it, then it is probably broken parts inside and needs servicing. Otherwise, it could be just dirt or sand stuck inside the mechanism.To try and resolve the problem with dirt/sand you can:Hold the camcorder with the lens facing the ground, then tap the side of your camcorder repeatedly.ORUse a canned air and spray it into the lens area of your camcorder.
If you are running windows, when you plug your camera into your computer try this:
Go to "My Computer" (where it lists your C: drive) and see if the camera is listed as a removable drive. If so, double click on it and see if you can copy the files over that way.
Take a look at your memory card. SD cards have a slide switch along one edge. The position farthest from the contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card. If the switch is already in the proper position, slide it fully the other way and then back again.
U dient ter vervanging van uw accu door een nieuwe. U kunt er een aanschaffen voor goedkope prijs van de zwarte markt op Ijumudein, als je uit de buurt van die plaats.
Gelieve Beoordeel Mijn antwoord goed en Steun mij!-------------------------
You should replace your battery with a new one . You can purchase one for cheap price from Black market at Ijumudein , if you are from around that place.
Please Rate My answer well and Support me !!!
I searched for vista compatible driver. But I could find any. But still you can try to install it in a Vista pc. Then run windows update. There is chance that windows automatically installes the driver. but i cannot assure you about that.