20 Most Recent Creative Labs Inspire P7800 Computer Speakers Questions & Answers

The volume control is nothing more than small complicated rheostat. If you don't know electronics take it to a radio repair shop. Just tell the repair guy to build you a new one using the old cord. That is if the cord is not what is bad! Take the entire unit with you. For a trained repair man it should be a easy thing to rebuild. I own a P7800 and if the control unit should break that is just what I would do.

Any good off the shelf adapter should work, but make sure it reads:

INPUT: 100V to 240 V 50/60HZ OUTPUT: 12V DC, 2.9 Amps

Radio Shack or Best Buy is your best choices on finding one.


Thanks for choosing FixYa, If you find this helpful please vote and leave a comment.

Hello friend! Can you help please?! I have this same model and lost the cable of this control. I need the sequence of the wires to rebuild a new one. Can you help me please? Try send me in denis.gianne in gm4il. I'm from Brazil! Thanks! This is a great sound device :)

I have the same set of speakers and it seems to be a common problem. I've noticed that I can usually get it to work again by disconnecting the power to the unit for 5 minutes and it'll start working again. If that doesn't work, unfortunately, the control unit is proprietary. You might have some luck if you contact Creative support.

http://support.creative.com

Go to "Contact Us" > "Customer Support" > "Technical Assistance" > "Speakers" and provide a description of the problem along with the model number of the unit.

actually two speakers are working because you are connecting the audio input cable to built in on board sound card jacks.
if you want 5.1 you have to connect the 5.1 sound card