9G. SSID:The Service SetIdentifier is the name as-signed to the wirelessnetwork. The factory SSIDsetting is set to default. Makechanges here to match theSSID on existing WirelessRouter or Access Point.H. Wireless Mode:The factory setting isset to Infrastructure.Ad-Hoc mode is usedfor peer-to-peernetworking.I. Channel:By default, thechannel is set to 6. Channelselection is automaticallyadjusted by the DWL-G520depending on the channelsetting of the access pointselected for association. Tochange the channel settings,the Wireless Mode must beset to Ad-hoc.J. TxRate:You can adjust thetransmission rate to get the bestsignal possible depending onyour usage and your environment.KHIGJK. Power Mode:By default, Power Mode is setto Continuous Access Mode. ContinuousAccess Mode— this default setting con-sumes the most power. Maximum PowerSave— this setting consumes the leastpower. Power Save — this setting consumesa moderate amount of power.
Wiz