17You can Enable or Disablethe IP Settings portionof your profile here. Ifyou select Disable youwill need to con gure theIP address informationeach time you connect toa network. If you selectEnableyou will maintainthe same IP addressinformation each time youconnect to a network.Using the Con guration Utility with Windows OS (continued)AdvancedAd-Hoc Channel:All devices in the Ad-Hocnetwork must be set to thesame channel.Click Apply if you have made any changes.Data Packet Parameter:Select the parameters here.Pro le IP Settings:Select Enableor Disable.Launch Utility on Startup:Power Mode:Disable -This default setting consumes the most power.Enable- This setting consumes the least power.Fragmentation Threshold:This value should remain at its default setting of 2432. If you experiencea high packet error rate, you may slightly increase your FragmentationThreshold within the value range of 256 to 2432. Setting the FragmentationThresholdtoo low may result in poor performance.This value should remain at its default setting of 2432. If inconsistent data ow is a problem, only a minor modi cation should be made.RTS Threshold:
Wiz