20 Most Recent
D-Link AirPlus Xtreme G DWL-2100AP 802.11g/b Wireless Access Point Questions & Answers
Unable to connect D-link Air
Under Windows 7, press the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'ipconfig /all', and press ENTER.
Look for the IP-address for the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.
The wlan light is not
Your printers should print, if the "wireless" part of your router is working -- printing does not depend on having a WAN connection.
I have a D link
Under Windows 7, press the "Start" button.
Type 'cmd' into the search-box, and press ENTER.
Type 'ipconfig /all', and press ENTER.
Look for the IP-address for the "gateway" (or "DHCP-server").
Type that IP-address into your web-browser.
I need help on how to use setup wizard
hat type of connection do you have? if you connect everything and put 192.168.0.1 in the address field in the browser you will be taken to the dlink router setup page. the default username is admin and the password is admin. from there you should see a setup link.
Default password
Hi,For D-LINK default password you can try one of these:Username: adminPassword: adminUsername: adminPassword: blank (just press enter after typing in the username)Username: adminPassword: password
Hi, how do you do a hard reset of the wdl 2100?
After resetting, go to the connection icon in the task bar > status > properties, then under TCP/IP properties select Use the following IP and use the following:
IP: 192.168.0.66
Subnet: 255.255.255.0
Default Gateway: 192.168.0.50
After that you should be able to change the settings through your Internet Explorer by visiting 192.168.0.50.
Make sure to also refer to the user manual for your device for more information:
Link DWL 2100AP user manual
How to reset to default system
copy and paste this link into your browser ftp://ftp.dlink.ru/pub/Wireless/DWL-2100AP/Description/DWL-2100AP_Manual_210.pdfit shows how to factory reset your access point on page 84
Not finding what you are looking for?