Top 20
Zodiac Sea Dragon GMT Black Dial Black Rubber ZO3701 Watch for Men Questions & Answers
ZO1002 zodiac watch battery replacement and any info and instructions would be amazing impossible to find online
Opening the Watch Back If your watch back has no screws and only pin holes, it might be a snap-off case back. Here are some general steps to open a snap-off watch back:
Use a thin blade or a similar tool to pry the back off. Be careful not to scratch the watch.
Insert the blade into the seam between the watch back and the watch case.
Apply a small amount of pressure to lift the back off.
Please note that these are general instructions and may not apply exactly to your specific model. If you're not comfortable doing this yourself, I recommend taking it to a professional.
Adjusting the Links If you need to adjust the size of the watch band by removing or adding links, here are some general steps45:
Look for the arrows on the underside of the band. These arrows indicate the direction to push the pins out.
Use a pin pusher or a similar tool to push the pin in the direction of the arrow.
Once the pin is out, you can remove the link.
To reattach the links, insert the pins in the opposite direction of the arrows.
A jeweler or watchmaker might open this for you otherwise.
I found some general instructions for operating quartz watches which might be helpful but I can't find specifics for your watch. You can try contacting the manufacturer, otherwise.
To set the time, pull the crown out to the second position. Turn the crown to adjust the hour and minute hands. When the day changes, the watch moves to AM (ante meridiem) status. The day will change automatically during the period between midnight (0:00) and about 5:30 am.
After setting the time, push the crown back in to the first position. The watch and the seconds hand will restart, now set to the exact time
I have sent a Zodiac watch to Switzerland and the
If the watch parts are out of production (Generally speaking manufacturers only keep enough parts to make repairs for about 5 years) a revision is another way of saying the workings of the watch will be replaced but not with the same parts it came with. This is usually a modification to accommodate a new movement.
How do I set time.? No manual, remote does not work.
- Buttons on the Device: Look for any buttons on the device itself. Sometimes, there are buttons that allow you to navigate through menus and adjust settings directly on the device.
- Trial and Error: Try pressing different buttons on the device to see if any of them bring up a menu for setting the time. Look for buttons labeled "Menu," "Setup," "Clock," or similar.
- Long Press: Sometimes, pressing and holding certain buttons on the device can activate different functions. Try pressing and holding various buttons to see if it triggers a menu for setting the time.
- Google Search: If you know the model number of your Ultech device, try searching online for the manual. Many manuals are available for download from manufacturer websites or other online sources.
- Contact Manufacturer: If you're unable to find the manual online or if you're still having trouble setting the time, try reaching out to Ultech's customer support. They may be able to provide you with guidance on how to set the time on your device.
- Replace Remote Batteries: If the remote isn't working, try replacing the batteries. Sometimes, a non-functional remote can be as simple as dead batteries.
2/28/2024 9:48:32 AM •
Watches
•
35 views • 0 helpful votes
Not finding what you are looking for?