20 Most Recent
Questions & Answers
I can`t install it correctly.can you give me
This is quite the job...I owned an Automotive Audio shop and my best tech took nearly 3 hours to install the 975 ! Contact BEL they're very good on customer service...If you're not capable perhaps they may recommend a dealer for installation.
BEL 975R Radar...
on Jan 02, 2010
Using wrong power cord
Sounds like a dirty receptacle. If you're a smoker, I guarantee that's the problem. Take the cigarette lighter fuse out of your vehicle and clean the receptacle with sandpaper wrapped around a small stick. Good luck!
on May 27, 2014
Beltronics rx65 service required can I fix this
This detector - along with other high-end types that require a microprocessor to analyze signals - performs a self-test when powering up. This is done for the same reasons a Power On Self Test is done on your computer. There's a lot going on inside and if just one area is malfunctioning data may not be processed correctly and in the case of the detector - resulting in aggravating false alarms or worse - not indicating an alert when needed.
You should arrange for the detector's return to Beltronics for thorough checking / realignment. Contact Beltronics via this link
I hope this helps!
on Dec 14, 2013
Not finding what you are looking for?