Epson PhotoPC L410 Digital Camera - Answered Questions & Fixed issues

Videos with sound is possible or you can record sound memos as well

Recording and Playing Sound Memos
You can record and play back sound memos for your photos while you view them on the LCD screen.
1. Turn the Mode dial to playback mode.
2. Press the MENU button. Playback Menu 1 is displayed.
3. Select Sound Memo by using the u d buttons, then press the r button.
4. Press the OK button and then start recording.
5. When you are finished recording, press the OK button. You can play or delete the sound memo or record
a new memo.
6. Press the MENU button twice to exit the menu.
When you play back a photo that includes a sound memo, the icon appears on the screen. Press the OK
button to play the sound.
Note:
You must have at least one photo saved to record a sound memo.

You can try a new battery for it or reseat the flash card if that doesnt work still try another flash card.

The camera’s internal memory is not used to store pictures when a memory card is installed. The memory card becomes the default location for storing pictures. However, the PIF frames and sound files stored in the camera's internal memory are still available.

Yes!

No. Aproximately 9MB of the camera's internal memory is used to store PIF frames and sound files.

Follow these steps: 1. Connect the camera to the printer. 2. Turn on the printer. 3. Turn the Mode dial to Playback mode and turn the camera on. 4. Press the (+) button on the camera. 5. Press the up or down button, choose Select images, then press the OK button. Note: If you see the message “Use previous print order selection?” select No, then press the OK button. 6. The images display as thumbnails. Select the first photo to print using the < or > button. 7. Select the number of copies to print using the up or down button, press OK. The screen displays the print settings and the number of copies selected. 8. Press the MENU button to return to thumbnails. 9. Repeat steps 6, 7, and 8 to select additional images. 10. After you select all the images to print, press the MENU button. 11. Press the up or down button to select Print an Album. 12. Select the number of photos per page using the < or > button, then press the OK button. Note: To determine the maximum number of images your printer can print per page see the table below. If you select more images per page than the printer supports, the camera will display the error “This function is not available”.

Yes. There are two ways to delete the PIF frames and sound files from the camera: * Connect the camera to a computer and drag the EPUDL folder and EPSOUND folder to the recycle bin or trash can on your computer. * Format the camera’s internal memory. Note: If you plan to restore the sound files to the camera’s internal memory, save a backup copy of the EPSOUND folder before you delete the folder.

Check the following: * Make sure the battery or batteries have power and are correctly installed. You may need to replace the batteries. * Make sure the power is on. The camera may have turned off automatically to save power. Press the POWER button to turn the camera on. * Make sure the Mode dial is set to the correct mode. The shutter button will operate when it is set to Manual mode, Automatic mode, Continous shooting mode and Video mode. * Check the number in the lower left corner of the Camera’s LCD screen. If the number is 0, the memory card (or internal memory) is full. Copy the photos to a computer and delete them from the camera.

The camera may have shut off automatically to save power. Press the POWER button to turn it back on. Also make sure the mode dial is turned completely to the desired mode. When the camera is connected to a computer, the LCD screen is disabled. When it is connected to a printer, press any button to display the print progress screen. After a moment, it disappears again.

If the LCD screen is too bright or too dark, adjust the LCD Brightness setting in the Setup Menu. If you are shooting photos outdoors in bright light, move the joystick to the icon showing the sun over shaowed area to turn on Outdoor mode and make the LCD screen easier to see in bright light.

Although the photos are saved as .JPG, is there an issue with the physical size of them ? Perchance, should the loaded image exceed the size of the paper loaded, the printer may not be able to print it.

Download what ? Manual ?

Hi, go to the link below to download it :-) jn3v16

No you don't have to buy a new printer :-) for a few pence /cents you can buy an adapter from eBay.

You may have a finger getting into the area in front of the lens.

The D7000 doesn't have wireless capability on its own. However, depending on how your printer is configured, you could use an Eye-Fi card to send your pictures to be printed.

It's ancient, worthless and totally obsolete. Spare parts will be impossible to obtain. Repairs will be completely uneconomical if you have to pay for them in any way (parts or labour).

In short, you have absolutely nothing to lose by trying a DIY repair, and even if it fails (highly likely) you gain valuable experience for when you next attempt such a repair.

BTW: the Epson 850z is not an SLR. The optical viewfinder does not take it's image from the same lens used to take the picture.

Can you be clearer on what do you need help with.

hi gbolshoy,

why do you need the drivers for by the way? is it for transferring picture / videos from the camera to your computer?

olympus did not create drivers for the device but only the application to manage the media. looking forward to your reply.

regards,

voodoo

It is not well thought of and considered a toy. https://www.google.com/search?q=digital+harinezumi+2+won%27t+turn+on ..