Gateway Belkin 54g Wireless DSL/Cable Router (DHF5D72304) - Page 4 - Answered Questions & Fixed issues

Use an Ethernet cable between a LAN port on the router and the network-port on your computer.
Start Internet Explorer.
Access the "built-in" web-server inside the router.
Use the web-interface to set an SSID, the encryption-level (use 'WPA' instead of 'WEP'), and the password/passphrase.

u can download a third party program to hack their wep key

You need to enable WEP security in router follow below procedure to secure your wireless network.Connect your router to computer with ethernet cable then you can access it with following default link. http://192.168.1.1 or http://192.168.0.1 or http://192.168.15.1 or http://192.168.2.1 If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it. Then it ask for user name and password. Type user as "admin" and password as "admin" or "password" or blank. Then you can see configuration page of router. Then click on wireless settings then wireless security then enable WEP security and enter WEP key it is your password to connect wifi.Then save settings and restart router . Then when anybody try to connect your wifi it ask for that password. Let me know if you need further assistance. Thanks for using FixYa.

IN order for you to check the IP address and default gateway of your computers it will be better if you check it under command prompt. To do that click Start > RUN then type CMD and hit enter then the command prompt will open type there IPCONFIG and hit enter and there you will see the information that you need.

There will be a tiny reset switch. Do it. Default username and password are "admin" and "admin".

Please enter the IP address of the Router in the internet explorer and enter the user name and password of the router.(admin, admin). When the windows will open, you can see the wireless security. When you click on that you can see the security key. Other wise you can change the security key.

Hi,

XBOX 360 is alredy wifi enabled you dont have to plug a thing in to it, if you want to configure wireless

All you got to do is turn on your wireless router/access point and try to search for available network in Xbox 360 and upon selectin the network it would ask for wireless key (WEP key cab found on the back or bottom of router) punch in the key and bingo...its done
Your box is ready to be wirelessly connected to internet and play online

alternatively if you dont ahve a wirelss router or you are facing difficulty is seraching wireless router or finding the security key

Connect the router to modem > then connect the router and XBOX with an ethernet cable
It will work

Else you can also try connecting the modem and XBOX with an ethernet or USB cable

(However in all the aboove scenario, please ensure the modem is getting the internet link through the normal RJ11 or phone cable, please dont unplug that else though your XBOX would be connected to Modem or router but it wont get internet connection)

Go into the router (probably 192.160.1.1) - find the security tab - set the pass.

Ipods don't connect to routers. Ipods plug into USB ports on your computer.

hi

If you have forgotten your LinkSys router password, the easiest thing to do is to reset your router to the factory default settings.

To restore the router configuration to factory defaults, hold the reset button on the unit for 30 seconds.

Step 2 jQuery(document).ready(function(){ jQuery('#jsArticleStep2 span.image a:first').attr('href','http://i.ehow.com/images/a02/2p/6m/reset-password-linksys-router-1.2-800X800.jpg'); }); Once your router is hard reset, you will need to login and reconfigure it again.

To reconfigure your LinkSys, connect a PC to one of it's Ethernet ports, load a web browser, and go to the URL http://192.168.1.1/. This will take you to a popup box which asks you to enter a username and password to login to your router.
LinkSys Default Password

On older LinkSys routers, the default username is blank and the default password is "admin." On newer Linksys routers, both the default username and the default password are set to "admin."

Once you are past the login screen, you are able to reconfigure the LinkSys router.
You want to go to the management tab and change the administrator password to something else to keep others from accessing your router.

Step 3 After changing the administrator password then you will need to enable WEP or WAP security so your nosy neighbors aren't tapping into your wireless network. I am picking up 4 networks with my pc antenna.

Hi there,

Please let me know the device that you are using so that I can help you with the same.

Thanks,
Hemz

Double click on Wireless Network Connection taskbar, then click property, on Wireless network's tab, check on the box ' Use Windows to configure......"

You can configure it without disk too.
Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.15.1
or
http://192.168.2.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Then click on WAN settings and set wan settings as your internet service provider settings.
Enable DHCP if you want ip from router.

Click on wireless settings then WPA Security then not down code .It is your password to connect wi fi..
Then you can connect your wi fi network with that code.
Then save settings and restart router
Let me know if you need further assistance.
Thanks for using FixYa.

If you can still remember the password that you entered on the configuration page, follow the steps below:
1. In the lower right corner of your screen (near the time and date), right click on the wireless network connection icon, then select view available wireless networks. Or, if your wireless adapter has its own wireless utility, you should see that in the lower right corner of your screen.
2. You should see the router's wireless network name (SSID). By default, the SSID is "belkin54g". Select the SSID and it will prompt you for the network key.
3. The network key is the password that you entered on the router configuration page.

If you cannot remember the password that you entered, follow the steps below.
a. Connect your computer to the router using an ethernet cable.
b. Access the setup page by typing 192.168.2.1 in the address bar.
c. Go to Wireless -> Security. Copy the network key.
d. Then follow steps 1-4 above.

For the MAC computer:
1. From the Airport menu, select the SSID.
4. When asked for a password, enter the network key that you entered on the router.

I hope this helps!

lost key

For that go to your network adapter tcp ip property and enable ip get automatic so it gets ip from router.
If still not able to access then press RESET button for 10 seconds it is in back side of router.
Then all settings defaults.
Then Connect your router to computer with ethernet cable then you can access it with following default link.
http://192.168.15.1
or
http://192.168.2.1
If you are not able to access it with above ip then check your computers ip address gateway ip is your router ip try with it.
Then it ask for user name and password.
Type user as "admin" and password as "admin" or "password" or blank.
Then you can see configuration page of router.
Click on WAN settings and set those settings as your internet service provider settings.
Enable DHCP if you want to get ip from router.
Click on wireless settings enable wireless then enable WEP Security then add WEP code .It is your password to connect wi fi.Then save settings and restart router.
Then you can connect your wi fi network with that code.

Let me know if you need further assistance.
Thanks for using FixYa.

1. log into the router and click the "wireless" and uncheck the radio brocast.

I think you meant WEP key. this is a wireless encryption security key. and it is normally required when you try to connect to a secured network. Your administrator should be able to provide you with this. because it varies. i.e you can set it to whatever you want if you have access to the wireless router. in your case Belkin 54g Wireless DSL/Cable Router
so please if you have access to it, log in to the router and check from wireless security settings.

Regards

1. Log into your Wireless Router or Access Point.
Open your web browser and type in the IP address of the Wireless
Router or Access Point. (The Router’s default is 192.168.2.1, the
Access Point’s default is 192.168.2.254.) Log into your Router by
clicking on the “Login” button in the top, right-hand corner of the
screen. You will be asked to enter your password. If you never set
a password, leave the password field blank and click “Submit”.
Click the “Wireless” tab on the left of your screen. Select
the “Encryption” or “Security” tab to get to the security
settings page.
2. Select “128-bit WEP” from the drop-down menu.
3. After selecting your WEP encryption mode, you can type in
your hex WEP key manually, or you can type in a passphrase
in the “Passphrase” field and click “Generate” to create a WEP
key from the passphrase. Click “Apply Changes” to finish. You
must now set all of your clients to match these settings. A hex
(hexadecimal) key is a combination of numbers and letters from
A—F and 0—9. For 128-bit WEP, you need to enter 26 hex keys.
For example:
C3 03 0F AF 4B B2 C3 D4 4B C3 D4 E7 E4 = 128-bit key
4. Click “Apply Changes” to finish. Encryption in the Wireless
Router is now set. Each of your computers on your wireless
network will now need to be configured with the same
security settings.

This is because you will need to open the ports your PS3 uses on your router. This is done by logging into your router and saving open the ports your PS3 needs.
Hope this helps, if you need more info just post again!!



If this was helpful please rate with a 4 thumbs up!! Thanks for using fixya.com!!