Safe International New and Improved HOME SENTRy II Reengineered and improved Interference Free 4 Camera Digital Monitor From SAFE BABy - Answered Questions & Fixed issues
Bumil safe
Hope my experience helps someone: followed instructions above, removed batteries, unscrewed 2 Phillip screws. This allowed the electrical assembly to be lifted off the door. No override key hole or anything. What I did notice though was that the negative (black) soldering connection point was completely corroded. Greenish white stuff. The red positive side was fine. Used a flat head screwdriver to scrape gunk off to expose the metal contact. Then also exposed some of the black wire (shiny metal). Placed fresh batteries back in, and pressed the freshly exposed contact and wire together. Voila, the unit beeped and came nack to life. Entered combination, managed to unlock and open the safe. Re-soldered the contact and wire together. Fixed. Just simple corrosion resulting in loss of electrical conductivity. Crude electrical system, easy fix.
1/5/2024 2:02:56 PM •
Safe...
•
Answered
on Jan 05, 2024
•
1,630 views
Low batteries in my safemark safe- how do i open?
e-bar is not a battery problem, it means the door lock is jammed, either use a rubber malet or your balled up fist and after inputting the code to unlock hit the door of the safe all around the key pad as hard a you can, your will hear the rods moving and unlocking the door. Hope this helps. I know it works I do this at the hotel I work in.
10/2/2013 5:12:49 AM •
Safe...
•
Answered
on Oct 02, 2013
•
11,498 views
My doorbell has gone quiet
It may have this silent option in either choice for volume or melody. My doorbell has numbered buttons that need to be pressed together with the button to open the door, in order to access these functions.
Another thought is that a battery needs to be replaced.
2/10/2024 4:57:34 AM •
Home Security
•
Answered
on Feb 10, 2024
•
21 views
How can I reset my floureon h 264?
Press the reset button: Using a small tool like a toothpick or paperclip, press and hold the reset button for a few seconds until the DVR resets. This will restore the DVR to its factory settings, including the default password
1/24/2024 10:45:58 PM •
Home Security
•
Answered
on Jan 24, 2024
•
820 views
No sound ..Floureon 4 channel NVR Camera system...Help
- Access Menu then go to Record. Choose Parameters then Record .
- Change the Camera to where your microphone is connected (e.g. channel 1).
- Change the Stream Type to Video and Audio.
- Put a check on the box beside Record Audio. If you cannot see it, click More Settings first.
- Click on Apply to save the settings.
1/8/2024 12:23:08 AM •
Home Security
•
Answered
on Jan 08, 2024
•
470 views
Sentry valueguard 1310 how to open don't have combination
? 2:08
https://www.youtube.com/watch?v=KYv5gh9lu_k
Nov 5, 2014 - Uploaded by steven gray
how to open a Sentry Safe Point the dial to 0 Turn the dial to the left ... I dont have a combination but have ...
? 1:26
https://www.youtube.com/watch?v=FghqfHL4ns4
Nov 3, 2012 - Uploaded by e3locks
How to open a dial open a Sentry 1330 safe. ... Cracking acombination lock without picking. SUPER EASY ..
12/4/2023 12:00:19 AM •
Home Security
•
Answered
on Dec 04, 2023
•
5,841 views
Not finding what you are looking for?