20 Most Recent Bronica SQ-A Medium Format Camera Questions & Answers


Try removing and re-attaching the lens. IIRC, the actual shutter mechanism is part of the lens assembly

Bronica SQ-A... | Answered on Jun 19, 2017


Sounds like a problem with the single/multi "switch".
Film should not wind on in "multi" setting.
Back to the dealer - if he is reputable, he will get it fixed.

Bronica SQ-A... | Answered on Dec 27, 2009


Depending on where you live, your best bet is one or more of the following: 1) eBay 2) your nearest Tamron distributor/service centre (Tamron bought Bronica in the early '90s and may still cary spare parts). 3) local camera repair centres

Bronica SQ-A... | Answered on Jul 05, 2009


Ok, The dark slide has to be in the right way. A small tab sticks out of one end that matches a small slot below the main slot where you put the dark slide. The tab will sometimes miss the release arm in that smaller slot

Bronica SQ-A... | Answered on Jan 27, 2008


Here are some sources:
B&H:
buycheapr:

Bronica... | Answered on Feb 20, 2012


Fixya does not sell anything - we attempt to help people solve technical issues, or give advice. Try the mfr or original vendor, or find a suitable wall bracket.

Photography | Answered 4 hours ago


You need to edit them for the correct orientation on your computer, before you download them - there is no capability in the frame to retain the data.

Photography | Answered 3 days ago


Some Laptops have the ability to automatically rotate pictures based on certain criteria. Being as you now know the pictures are sideways, simply rotate them in most any graphics program, and save them with a different name. (I usually use something like HPIM2345.JPG and the new name would be HPIM2345a.JPG. I do this so I still have the original in case something goes wrong. I go through the whole batch from my camera or phone, rotate as necessary, and once I am sure they are OK then I delete the original.

Photography | Answered 3 days ago


Two possible causes spring to mind :
1) You may not have undone the release sufficiently for it to move freely
2) There may be grit or other foreign matter trapped in the bearing. If you can take it apart, you should be able to clean the contact surfaces and re-lubricate it before re-assembly.

Photography | Answered on Dec 13, 2017


Sounds as if you are merely loosening it on the centre column. You need to slacken off the horizontal control, usually near the panning handle.

Photography | Answered on Dec 10, 2017


CONTACT FUJI not fixya they have warranty .

Photography | Answered on Dec 09, 2017


listing what camera you are asking about might be a big help when asking a question here at fixya. please re ask your question separately

Photography | Answered on Dec 08, 2017


Whatever the actual subject matter of this query (which is a little unclear from the way it is worded), it does not appear to relate to a camera.

Photography | Answered on Dec 06, 2017


Clean the PCB (printed circuit board) check all the connectors and the circuit's internal connections whether it is OK or not if there is some loose or stain then try to reconnect the same and clean all the parts easily with a brash then the problems will not occur

Photography | Answered on Dec 05, 2017

Not finding what you are looking for?
Bronica SQ-A Medium Format Camera Logo

10 questions posted

Ask a Question

Usually answered in minutes!

Top Bronica Photography Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

5077 Answers

Are you a Bronica Photography Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Bronica Photography

  • Bronica Photography

Most Popular Question

film back jammed

  • Photography
Loading...