Kodak EasyShare DX7590 Digital Camera - Answered Questions & Fixed issues


Installing a new SD card is as simple as pulling the old one out and sliding the new one in. You may need to "format" the new card, using the camera's menus.

Kodak EasyShare... | Answered on Dec 14, 2015 | 47 views


Usually means the card is bad. Confirm it won't do _any_ cards. Then it's a problem with the camera, and it will be a circuitry issue... not easily repaired.

Kodak EasyShare... | Answered on Sep 02, 2015 | 1,755 views


Us a reader an format it. Camera may limitation on how much space it can read / write

Kodak EasyShare... | Answered on Feb 13, 2015 | 51 views


from this manual:
http://www.imaging-resource.com/PRODS/DX7590/DX75A.HTM

is the following statement:
On the bottom panel of the DX7590 are the metal tripod mount (kudos for the use of metal here), dock jack, and battery compartment. The threaded tripod mount is a little off-center and too close to the battery compartment for quick battery changes while working with a tripod. The battery compartment features a locking, hinged door, which slides to the side to open under spring pressure.

Kodak EasyShare... | Answered on Nov 14, 2014 | 83 views


as a short cut try putting the sd card into your sd slot and format it with your computer

Kodak EasyShare... | Answered on Sep 24, 2014 | 8,193 views


Unfortunately this is a common problem. It can be repaired but repair will be about fifty dollars. One repair shop is:

levasseurjohn@Hotmail.com

Kodak EasyShare... | Answered on Jul 16, 2014 | 42 views


Although it is annoying when you see a scratch, most scratches can't be seen on a picture. Unless it is very deep and in the centre. The only problem is, you easy can get a lens flare.
If you can live with the scratch, forget that it is there and only avoid light shining on the front lens from the side. My DX7590, still has a perfect lens, but I can't shoot, because my mode dial and joystick don't work any more. I still enjoy the pictures I took with that camera.

Kodak EasyShare... | Answered on Jan 30, 2014 | 49 views


Although you did not mention what Dock you are using, I assume it is the Camera Dock 6000. Is the Dock connected with the power supply? Because only connected to the PC with a USB cable will not be enough. Also the LiIon battery in the camera, should be charged at least once. If the battery is completely empty the dock will have trouble to. The dock can be used to charge your camera. Then the lights should indicate the state of the battery. And the Dock can be used to transfer pictures to the PC. But before that will work correct you have to install the software that came with the camera. (Easy Share software)

Kodak EasyShare... | Answered on Jan 12, 2014 | 109 views


If you move the switch on the right of the flash, to the right, the flash still won't come out? That is how I have to open my flash on my DX7590

Kodak EasyShare... | Answered on Dec 02, 2013 | 135 views


To change the resolution, see "Picture Size" on this page: http://resources.kodak.com/support/shtml/en/manuals/urg00273/urg00273c2s12.shtml

Kodak EasyShare... | Answered on Oct 01, 2013 | 30 views


Check the wall socket connection. Maybe the plug fitting is loose.

Kodak EasyShare... | Answered on Jul 27, 2013 | 36 views


See this page of the user guide.

Kodak EasyShare... | Answered on Feb 14, 2013 | 36 views


Press menu, go to set-up and scroll down to format.

Kodak EasyShare... | Answered on Jan 24, 2013 | 18 views


Hello, The problem is the DX7590 does not support SD cards over 2 gig.
Best Regards, Russell

Kodak EasyShare... | Answered on Jan 24, 2013 | 144 views


Hello, The eyepiece does not have to be removed, the camera body sections are quite hard to separate, The rubber flaps do not need to be removed either, but there are screws under them. Use great care and go easy.
Best Regards, Russell

Kodak EasyShare... | Answered on Jan 24, 2013 | 227 views


Hello June, This sounds pretty easy, I repair these cameras. It sounds like you have a problem with the adapter that plugs into the wall outlet. Remove the battery from the camera and plug the a/c adapter directly in to the camera and try to power on the camera,if it powers on then the problem is the dock,if it do not power on it is the a/c adapter.
Best Regards, Russell

Kodak EasyShare... | Answered on Jan 24, 2013 | 47 views


Hello Ruby, On the mode dial you will see a setting for night time use, you should not have to change any other settings. If you refer to the user manual it will explain this in greater detail than I have room here to list.
Best Regards, Russell

Kodak EasyShare... | Answered on Jan 24, 2013 | 55 views


Hello Charlie, Hook your camera directly to your PC with the USB cable, The computer should see Kodak Easyshare, Double click on it to open and check in the folder shown for your photos and down load or delete them as you wish. As far as the SD card error it sounds like possible camera firmware problem,go to Kodak website under support for Dx7590 for the firmware and instructions.
Best Regards, Russell

Kodak EasyShare... | Answered on Jan 24, 2013 | 98 views

Not finding what you are looking for?
Kodak EasyShare DX7590 Digital Camera Logo

135 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Vitally Alcher

Level 3 Expert

1645 Answers

FIKRET UNALIR
FIKRET UNALIR

Level 1 Expert

239 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...