Kodak EasyShare Z740 Digital Camera - Answered Questions & Fixed issues


Here is a link to the manual to this camera. Please check the "Troubleshooting" part. Hope it will help!

Kodak EasyShare... | Answered on Oct 27, 2017 | 105 views

Have you tried this card in any other device?

Kodak EasyShare... | Answered on Sep 29, 2017 | 171 views

Format card in your computer first, using FAT 32 then try again in camera

Kodak EasyShare... | Answered on Aug 23, 2017 | 123 views

An external reader is the best solution. It will transfer the images way faster than using a cable connected to the camera. See if there is a setup option in your camera that chooses the SD card only for storing photos. If there is, then select it.

Kodak EasyShare... | Answered on Apr 15, 2017 | 204 views

Sounds like subject movement. Try using a faster shutter speed

Kodak EasyShare... | Answered on Apr 10, 2017 | 68 views

Press Menu, select the three-item icon, then select the ABC icon.
If you need a manual, you may download a copy at http://resources.kodak.com/support/pdf/en/manuals/urg00330/Z740_GLB_en.pdf

Kodak EasyShare... | Answered on Jan 30, 2017 | 68 views

Low light= slow shutter speed = camera shake
Use a tripod

Kodak EasyShare... | Answered on Dec 21, 2016 | 190 views

For Z740 camera the batteries should be AA Ni-MH batteries it will provide a maximum power on the camera. Now if your using the battery and its fully charged still wont turn On.

To test your camera if its defective, Try to Turn On the camera using a 3V AC adaptor if this failed it means you need to send the camera for repair you may call kodak tech support toll free 1 800 235 6325 ext 12

Kodak EasyShare... | Answered on Sep 12, 2016 | 197 views

The memory card might be bad. Try a new or different memory card and if those work fine, t is your card that's bad. Have you used this card in this camera prior with good results or is this the first time? Has the card been formatted on a different system or different computer prior and if so, there might be problems there and maybe if the card is good on other equipment, it might be relegated to just those. If you have data or photos on your card that you cannot recover yourself, you can try sending it out to a data recovery service you can find online.
Hope this helps, Mike

Kodak EasyShare... | Answered on Dec 13, 2015 | 68 views

if you insert the card and it would read the card immediately - not allowing you to see the pictures on the internal, that means the image storage is set to AUTO, you have to set it back to internal so you can copy them to card and just put it back to AUTO to reactivate the card

please follow this path:
insert card> turn on cam to auto> press review> "reading memory card" > press menu> scroll down to image storage> press ok to select> select INTERNAL MEMORY> press ok

scroll down to COPY> Copy pictures to memory card> scroll down to all> press ok
message to expect: "copying"

when it goes to back the menu screen
scroll to IMAGE STORAGE again and select AUTO> ok> "reading memory card"

you're supposed to see the copy of pictures from your internal and pics from your card if there's any

you can visit www.kodak.com/go/manuals

Kodak EasyShare... | Answered on Mar 23, 2015 | 10,565 views


Kodak EasyShare... | Answered on Jan 19, 2015 | 35 views

The link below takes you to a web page which deals with picture deletion:-
But this link below downloads a full manual for the camera, including picture deletion:-
Good luck

Kodak EasyShare... | Answered on Aug 25, 2014 | 36 views

64mb is a very small memory card..... my Canon might fit just 1 picture on there, with the 8gb, just follow the camera instruction to format it..... the camera wants to prepare the card for use.

Kodak EasyShare... | Answered on May 25, 2014 | 163 views

because it's a Kodak..... and the easyshare range have so many faults.... have you tried updating the firmware?

Kodak EasyShare... | Answered on May 25, 2014 | 29 views

No. The P850 works with MMC and SD cards, 2GB or smaller. It will not work with higher-capacity SDHC cards.

Kodak EasyShare... | Answered on May 22, 2014 | 55 views

you have to go into the setup (menu) and choose either external ( card) or internal memory for storage on kodak cameras set images and storage to auto and it will use both ( one fills then the other)

Kodak EasyShare... | Answered on Apr 16, 2014 | 47 views

my sansui lifepad is saying gallery has stopped

Kodak EasyShare... | Answered on Mar 28, 2014 | 117 views

Format it on a PC, and try again.

Kodak EasyShare... | Answered on Dec 19, 2013 | 301 views

Without knowing the model of your Casio Exlim 7.2megapixel camera I can't give you a definitive answer, but some earlier Casio cameras were designed to work with the original SD specifications, and will not work with the newer SDHC cards. SDHC cards will only work in cameras specifically designed to accept them. With older cameras you're limited to SD cards, 2GB or smaller.

Kodak EasyShare... | Answered on Nov 27, 2013 | 62 views

Not finding what you are looking for?
Kodak EasyShare Z740 Digital Camera Logo

409 questions posted

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

Vitally Alcher

Level 3 Expert

1645 Answers


Level 1 Expert

239 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides