HEWLETT-PACKARD Elitebook 8460P - Answered Questions & Fixed issues

see this i windows, it tell what drive is therethen from this fact we move top a cure. to view the movie, this is best and free google it./then load free VLC and it plays.

You might need some codec files installing to play specific file formats.Search google for free codecs. Like this:Codecs

You can check your DVD drive to see if there is any issue with your DVD drive. You can do this by using some DVD drive testing tools, such as Nero InfoTool and VSO Inspector. Then, you can also try some other DVD player software tools such as Leawo Blu-ray Player.

why not use the drivers seen at HP. for this model this model is supported 100% why not> NO OS stated, so I cant tell you which one, is this windows 7 why post lacking that key fact? all those things run custom HP driver, its not just one driver, its a set, and they work as TEAM. ok My guess device manager shows many things wrong. for same reasons. 11 different OS sold with this PC, 11. seen here https://support.hp.com/us-en/drivers/selfservice/hp-elitebook-8460p-notebook-pc/5056942 there is this magic program that might help (i never trust magic) but you can get lucky, luck happens. if not we do it all by hand. http://h18021.www1.hp.com/helpandsupport/hp-self-support.html

There are no master password generators for ProBooks or EliteBooks. You will need to contact HP. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html?jumpid=reg_r1002_usen_c-001_title_r0003 Or look at this link. http://forums.mydigitallife.info/threads/49497-HP-Probook-Elitebook-BIOS-Password-Reset-Utility Or replace the BIOS chip. http://www.ebay.com/itm/HP-Probook-4310s-4410s-4510s-4710s-6440b-6445b-6540b-6545b-Bios-Chip-No-Pass...

Hi this sounds like a memory/ram issue you need to power of your machine, remove the power cable & then without the power cable connected, press & hold the power button for 15 seconds until it makes a chime noise, that is a basic power function reset, if that does not solve it, remove the memory cover panel on the under side of your laptop then carefully remove the memory chips blow or vacuum the area & use a dry piece of tissue to very gently clean your memory of any dust, replace the ram chips & re-connect power cord, this should solve it, but if not try starting up again without the power cord, if it's successful without the power cord you'll need a new 1, if not it suggests your ram chips have gone bad & you may need to purchase new ram chips, good luck :-) you can find more info about the 5 beeps here: Computer Does Not Start and Emits an LED or Beep Code if you need to purchase new memory/ram chips you can get cheap ram here: Cheap Laptop Memory RAM Upgrade Low Prices UK Deals Ebuyer com If you do need to buy new ram chips, I'd advise buying 2x 4GB modules :-)

1. Power your laptop off completely.
2. Take the battery out of the laptop. Typically the battery is located underneath the laptop towards the top.
3. Leave the battery out for 30 seconds. This will allow the laptop to refresh itself.
4. Put the battery back into the laptop.
5. Power your computer on. Once your computer has rebooted, check to see if the keyboard is working.
6. Open the "Start" menu on your laptop, if the keyboard is still locked up.
7. Click on the Control Panel.
8. Go into the "Accessibility" options.
9. Open the tab labelled "Keyboard".
10. Make sure none of the boxes have a check in them. If the laptop has Microsoft Vista as the operating system, go to the "Ease of Access" option and go to "Change how your keyboard works." Make sure none of the boxes in that section are checked.
11. Click the "Save" button.
12. Exit the Control Panel and begin typing to see if the keyboard is now working.

You need to contact HP Tech Support about this issue, they will send you a file called "SMC.bin" Which needs to be placed on a flash drive. When the flash drive is in the port, reboot following the instructions that Tech Support sends along with the file. After that, it will be unlocked and you can set the SN, PN, and so on.

take a look here: onedrive live com

clean it up

Due to dust.Just remove the keyboard with little scree driver and clean it up .

Best way is to use some third party software. There are many available online.

you may need software like ArcSoft Webcam Sharing Manager for your web camera click on link to download from HP website https://www.google.co.uk/search?q=ArcSoft+Webcam+Sharing+Manager&espv=210&es_sm=93&source=lnms&sa=X&ei=2D-XUq3OOuqM0AWBx4GoDA&ved=0CAgQ_AUoAA&biw=1920&bih=954&dpr=1

Are you trying to use something like VirtualRouter? I have had some trouble with these programs especially with Win7/8 compatibility. Generally I am able to solve them with some troubleshooting but there is not one Fix All. Let me know exactly what software you are using to create the hotspot, as well as what operating system you are using.

Me tooRegards,joecoolvette

Take a look at this forum for the on/off of touchpad: http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/Elite-Book-8460p-touch-pad-mouse-pad-wheel-pad-track-pad/td-p/1379623

Try system restore.

Ok here is the command for viewing MAC ADDRESS or you can say PHYSICAL ADDRESSSTART---RUN----cmd--- here type 'ipconfig /all' (without the quotes). Did you notice there is a space in between ipconfig and /, so remember to do that.Now it'll show you the list of all details.Below is the Screenshot of the MAC address. The Physical Address and MAC address are the same, inside the yellow mark is MAC or Physical address.

use your command prompt and type ipconfig /all then look for physical address. that is your mac address.(To get to command window just press windows key and R then type cmd and press enter.)

Double tap on the touchpad LED (top left corner) - it toggles between turning it on and off.