20 Most Recent Xerox Phaser 740 Plus Laser Printer Questions & Answers

If everything at the printer looks fine (test prints, and no errors on the display) I would de-install and reinstall the software. The DE-install is important, DO NOT just reinstall over the top of the current installation. Also I would reboot after I removed the software and BEFORE I reinstall it. It might be overkill but it won't hurt to be through.

Hi stanz361,

I have been through this frustration,

What you need to do not is follow the below steps :-

Switch off your printer and unplug the power cable and unplug the cable.

Remove all the printer's driver / application that has been installed.

Then restart your system.

When you restart your system , connect the cable back to MAC and then download the latest drivers.

When you do this , try and print a page and this will be the solution for you.

Hope that helps ..: )

Replace your toner cartridge with a known good one even if it's empty. If the lines are not present you know you need to install a new one.

JM Liabo English only on Fixya please. We are a North American website and only converse in English. hello, I have a phaser 7800? the ignition it puts this code, I switched off and on again? the first switch after 5 seconds as indicated. Same thing, nothing, so I wiped the color sensors. The problem persists. What to do? Call for Xerox Service https://translate.google.ca/?sl=auto&tl=en&op=translate Fixes

Xerox Phaser 7800 - Error Code - PrintCopy .info

https://printcopy.info > model=Phaser+7800 Code: 389.601 · Description: RC Sample Block Fail-A1-In. During the A1 (fine adjustment pattern) and C patch detection, the patch at the MOB Sensor In side did . and more here https://www.google.com/search?q=Xerox+Phaser+Error+389.601.00 ..

Question edited for clarity, full 'make model (what it is)'. check out the videos, however, it is a Xerox and they like to keep track of page counts because it is often part of the contract for lease or toner supplies on their machines. https://www.google.com/search?q=phaser+3260+printer+reset+counter ..

Here is your Service Manual. There are 147 mentions of transfer roller. Press CTRL+F and type 'transfer roller' and press enter. https://www.printerparts-exchange.com/media/custom/upload/Xerox_Phaser_6250_Parts_Service.pdf ..

simple solution call the company's tech support

WE CAN NOT AS WE ARE NOT THE MANUFACTURER OR EVEN ASSOCIATED WITH THEM

https://www.fixya.com/support/t10514994-reset https://www.manualslib.com/manual/845101/Xerox-Phaser-6180mfp.html?page=1#manual

http://download.support.xerox.com/pub/docs/6180/userdocs/any-os/en/Fuser075102900a.pdf

Try this link: https://www.support.xerox.com/en-us/article/en/1551565

Try this link: https://www.support.xerox.com/en-us/article/en/x_6180_en-O7855

Try this link: https://www.support.xerox.com/support/phaser-6510/support/enus.html

Please check the HD & RAM.

I suggest You Go to Official Xerox Printer Page For You Xerox Printer Problem On Below Xerox forum URL Link: Clearing Paper Jams In Case You Still face Problem and Need Online Assistance Then Please Follow Us For On : Xerox Printer Support

Have you tried replacing the whole drum cartridge?

What model do you have?