20 Most Recent
Xerox Phaser 8500N Printer - Page 8 Questions & Answers
Error 04,018 48 xerox phaser 8860
The printhead temperature is too low.
Check the air temperature (the room should not be cold)
Test the heaters in Service Diagnostics Monitor. If the heaters function properly, then replace the Electronics Module...if they don't, then it could be a bad printhead, drum assembly, drum heater relay board, or drum temperature sensor.
Ppt presentation
i forget my printer password to setup the network it is imagerunner 2520, may someone help me?
Heat tempreture in Phaser 3200 MFP Fusing part
This option does not need to be changed unless you are getting a overheat error. If you lower the heat on the fuser this can result in image transfer on the paper leaving blotches and ruining the fuser.
Printer printing out page full of numbers
This is a driver issue. You may want to try the PCL driver (or use the Xerox Global driver). Download the latest driver for your operating system at
www.xerox.com. Either delete the printer and reinstall, or update the driver. Whichever is easiest for you.
Not finding what you are looking for?
