20 Most Recent Lexicon Alpha Desktop Recording Studio Questions & Answers

Take it back to where you purchased it, they will help you.

you SHOULD be able to. Just use Direct Sound in the host tab.

The most likely case is that one of the main output transistors (if which there are many) is shorted. When the protect circuit senses DC on the final output, it will not allow the output relay to come on to protect the speakers from raw DC. With the power removed, you can check between each outputs Emitter and Collector and you will probably find close to zero ohms. From that point you need to unsolder each of the pins of the bad channel until you find the shorted device(s) and replace them.

'pianoforte'

BREV. N. 838420

See page 22 troubleshooting of this manual. It may help you. dd501 (yamaha.com)

Depending on the model, there are four around that date, it could be the insert jacks are tarnished reducing the signal flow between the pre amp stage and digital power amplifier. It could be the power amplifier has failed. It could even be customer error in wiring. This assumes there is the correct level of signal entering the input sockets of course.

Are you sure you are quoting accurately? Could it be one of these instead? http://www.lyrics.cat/lyrics+lead+a+horse+to+water

It's a Line 6 and probably requires a software update from Line 6.

• Price:$1,099.99 on amazon