20 Most Recent GE VG4250 VHS VCR Questions & Answers

Two things. First there is some damage to the tape transport mechanism. Only a good look around will confirm this. Secondly a faulty mode switch.

check google

You need to check to make sure your audio cables are not reversed or not pushed all the way in. Also, if you have multiple ports for your cables, make sure you are using an in-line set of ports for all the cables.

You can get a tuner cleaner and lubricator spray and use it on the remote. Be sure and take out the batteries first and then let the spray soak in. Wipe off the excess and let the remoter sit for about 30 min. and then put the batteries back in. This should fix your problem.

is there a lithium battery in your vcr to back up short power outs?check for that battery short,and replace it if needed.

There is a partial operators manual on this site, but it doesn't show the troubleshooting section. This display may well indicate an error (abnormal) condition, which could be any number of things: A tape stuck in the machine, jammed loading or threading mechanism, defective optical sensor, or even an abnormality in the power supply. I'd suggest taking the top cover off, and looking inside for any obvious broken or bent mechanical parts. If you have a voltmeter, you could also check the power supply voltages. There should be a +5 (logic circuitry supply), +12 (12-15volt) (motors) supply, and perhaps a -35 (approx) supply for the on vcr display. If these is missing are radically off-tolerance, the VCR won't operate. Beyond this, it probably isn't cost effective to take it into a repair center. Today's low cost electronics are made disposable, unlike the higher quality units back prior to the '90s.

Hi how unfortunate.. It think it maybe possible to indeed recover something worthwhile if you take it along to a professional video processing Lab. Find a reputable one and explain ya problem.. they may be able to render it to another medium like say a DVD.. and perhaps can adjust settings so that the images are resolved.. I wouldn't expect too much though.. but these days ya just never know, as some of the software and expertise is amazing..so G L.

You did not mention model numbers of TV and Remote Control. Anyway I am sharing following three useful links for you help. GE Universal Remote Codes: How to Program Any Device - PC Guide How to Program Your Universal Remote (byjasco.com) GE Universal Remote Codes List and Program Guide (Updated) (ytechb.com)

Locating the model number on a GE universal remote can vary depending on the specific model. Here are some general tips to help you find the model number:

1. Check the Battery Compartment:
   • Open the battery compartment on the back of the remote.
   • Look for a sticker or label inside the compartment that may contain the model number.
2. On the Remote's Front or Back:
   • Check the front and back of the remote for any labels or markings that might indicate the model number.
3. User Manual or Packaging:
   • If you have the user manual or the original packaging, check there. The model number is often mentioned on these documents.
4. Behind the Battery Cover:
   • Remove the battery cover and inspect the area behind it for any labels or markings that include the model number.
5. On the Remote's Body:
   • Inspect the body of the remote itself. Some models may have the model number printed on the front or sides.

Once you locate the model number, you can then proceed to find the correct codes for your converter box. The codes are usually included in the remote's manual or can be found on the manufacturer's website. If you are unable to find the model number or the manual, you may need to contact GE customer support for assistance. If you provide more details about your GE universal remote, I might be able to offer more specific guidance.

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote 4 Digit Universal Remote Codes for Sansui TV ; 0394, 5871, 1052 1556, 1208, 0135 ; 0888, 0310, 6071 ; 6061, 0806, 5441 ; 2832, 0264, 1230.

Replacement Remote Control for SANSUI HDLCDVD265 ...

Amazon.com https://www.amazon.com > Replacement-HDLCDVD2... This is a custom built replacement remote made by Redi Remote for the SANSUI remote control number 076R0LJ020. *This is NOT an original remote control. Rating: 4.4 · ‎12 reviews · ‎US$34.95

Replacement Remote for SANSUI HDLCDVD265, ...

Amazon.com https://www.amazon.com > Replacement-HDLCDVD2... Replacement remote control for Sansui HDLCDVD265, HDLCDVD325B, 076R0LJ020 with all functions of original one. It replace each button of original remote ... US$16.00

Closed Captioning is run from your cable box or wherever the signal comes from. You use the cable box remote, not the television remote as it isn't a 'television feature'.

https://answers.microsoft.com/en-us/windows/forum/all/why-does-my-clock-keep-going-back-to-military-time/820b14aa-b831-4d17-9294-c18ec9a3abd6 This site may help you. It has helped 3 others.

There is no set-up codes to this brand TV with GE remote control. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box. http://electronicshelponline.blogspot.com/ http://remotesearch.blogspot.com/ http://electro-medical.blogspot.com/ http://electrohelponline.blogspot.com/

Yes, you can use a GE Universal Remote RC24914-D to set up your Roku Express box. To do this, you'll need to find the correct code for your Roku Express device and program it into the remote. Here's how:

1. Turn on your Roku Express device.
2. Locate the "Code Search" button on your GE Universal Remote. This button is usually labeled "Code Search" or "Setup."
3. Press and hold the "Code Search" button until the indicator light turns on.
4. Enter the code 9-9-1. The indicator light will blink twice.
5. Point the remote at your Roku Express device and press the "Power" button. If the device turns off, you have found the correct code. If it does not turn off, repeat steps 3 to 5 with a different code until you find the correct one.
6. Once you have found the correct code, press the "Code Search" button again to save the code.

The codes for the GE Universal Remote RC24914-D can vary depending on the version, so it's possible that the code 9-9-1 may not work for your device. If that's the case, you can try other codes listed in the remote manual or on the GE website. I hope this helps you set up your Roku Express device using your GE Universal Remote.

Try here........ https://www.eliztech.com/remotes/ge-4digit-v3-tv-codes.php

Yes, the antennae needs upgrading. It is not supplying enough signal for the television's capability and the HD programming that is now available. Or the reception where the antennae is is obstructed. https://www.manua.ls/sansui/hdlcd19wb/manual?p=24 https://www.google.com/search?q=14068+indoor+10+antenna ..

The make doesn't exist. https://www.google.com/search?q=aomni+television+remote+code Try this https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..

Hi, please reach out to general electric via twitter and ask them to post the product manual for you sos that you can download it and get the codes that you're looking for. Their id on twitter is @generalelectric. Thank you.