20 Most Recent Jensen LXA300 Car Audio Amplifier Questions & Answers

Specifically it's 50x2 rms at 4 ohms stereo, 75x2 rms at 2 ohms stereo, and 150x1 at 4 ohms bridged.

Jensen LXA300... | Answered on Aug 25, 2013

On most amps, rmt (remote) is a wire that connects to your stereo remote wire to the remote port on the amp. The remote wire turns your amp on when turning ignition on and turns amp off when turning ignition off. This wire needs to be connected as without it, you will drain your battery.

Jensen LXA300... | Answered on Jan 30, 2013

If your amp is 2 ohm stable it will do 75 rms to both sides maybe a little more.

Jensen LXA300... | Answered on Oct 31, 2011

You either have a short in your wiring (between the amp and the sub) or have wired the sub(s) at too low of a resistance. If for example you have wired it to 2 ohms, when the amp can only support a 4ohm minimum, the protect light would come on once you tried to turn up the volume a bit. This may happen if you have lost the wiring off one of your subs or one of the voice coils, thereby affecting the total resistance.

Jensen LXA300... | Answered on Mar 07, 2011

it means you have a short in your wiring, a bad (shorted) speaker or a short inside of the amp itself.

Jensen LXA300... | Answered on Jan 21, 2011

i have a 2 channel boss amp running my 6x9's & a candence 2 channel on my bass ..they say for ur mids & high's a 4channel is best , but i like the 2 channel better ... so i think u wil be fine with the amp uhave , just be sure 2 tun it down so it wnt blow ur 6x9's...

Jensen LXA300... | Answered on May 14, 2010

buy one at walmart...

Jensen LXA300... | Answered on Feb 24, 2010

disconnect the speakers that are connected to the amp, if the light clears u have either a shorted speaker voice coil or a shorted speaker wiring harness, if the light remains on the amp is defective and will need to be replaced or repaired, in most cases repair is very close to the cost of new..

Jensen LXA300... | Answered on Jan 18, 2010

2 x 75 watts RMS per channel (2 x 100 watts peak)
150 watts RMS bridged into a 4 ohm load

Jensen LXA300... | Answered on Jan 08, 2010

Replace the fuses.

Jensen LXA300... | Answered on Oct 24, 2009

it is not real hard to hook up a amp if you got any questions just ask me

Jensen LXA300... | Answered on Aug 22, 2009

it could have a short inside of the amp. my old amp did that and i moved my grounding wire and it shot sparks all throughout my trunk..... try to return it. or exchange it. tell them its defected

Jensen LXA300... | Answered on Aug 01, 2009

the r+ and r- are for the right sub and the l+ and l- are for the left sub

Jensen LXA300... | Answered on Jul 30, 2009

Not finding what you are looking for?
Jensen LXA300 Car Audio Amplifier Logo

Popular Tags

44 questions posted

Ask a Question

Usually answered in minutes!

Top Jensen Car Audio & Video Experts

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

The Knight
The Knight

Level 3 Expert

76054 Answers

Are you a Jensen Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jensen Car Audio & Video

  • Jensen Car Audio & Video

Most Popular Question

need high input plug

  • Car Audio & Video