Kenwood VR-6050 Receiver - Answered Questions & Fixed issues


It usually means something is drawing too much current---a short inside the unit----idea is to prevent a chain reaction that frys half the unit.

Consider having a shop look at it and do check to make sure all the connections are correct.

Kenwood VR-6050... | Answered on Dec 04, 2012 | 97 views


The following are the best I can do without specifics re: your TV and other TV-related equipment.

Since a TV without an antenna is rarely the source of any programming it is best to feed the receiver the best sound available from the device where it originates - cable / sat / DVD / BluRay / games. Your receiver probably has plenty of inputs to accomodate al of these. I also run the video directly to my TV, which has several video inputs, from each source because IT deserves the best unadulterated video.

If you have a cable box and want the best sound, get it directly and digitally from the cable box and run it to the receiver. Then leave the TV's speakers off for critical viewing with good sound.

Kenwood VR-6050... | Answered on Oct 19, 2012 | 254 views


This is a problem with the output transistors that power your speakers. This is a problem for a professional unfortunately.

Kenwood VR-6050... | Answered on Mar 16, 2011 | 101 views


Kenwood sound units are probably market leaders in most parts of the world because of the durability and high standard of their products. When loud screeching sounds and static is are heard on sound systems in most cases it is as a result of poor wire connections to the speakers. Check the wires to the speakers most likely the screeching and static is coming from those.
Also static could also be caused by mobile devices being close to the receiver. Mobile devices such as internet modems and mobile phones as well as radio transmitting devices could cause static and screeching.
Hope this solution has been helpful?

Kenwood VR-6050... | Answered on Nov 21, 2012 | 387 views


May I ask what the problem is. If you need the manual you can get it on the link below.

http://support.radioshack.com/support_audio/doc69/69230.pdf

Thank you

Kenwood VR-6050... | Answered on Nov 29, 2010 | 42 views


that reciever is not going to carry a hi definition video signal, it doesnt have either hdmi or component video inputs.

you can still use it, but if you run the picture through the reciever, it will have poor quality.

heres how you are supposed to hook it up:

find the single,m yellow video jack on your sattelite box, and hook that up to the "tv" video input, then hook the laft and right audio outputs from the cable box into the "tv" audio left and right inputs on the receiver. hook up the dvd player and vcr in the same manner, using "dvd" and "VCR" (if labeled as such) inputs on the reciever.

finally, send the tv video and audio outputs to the composite video in and left/right audio inputs on the tv. the video will be running through the reciever, and when you use the reciever to switch the sound source, the video will also be changed. you could get better picture quality if you ran the video directly to the tv using component (seperate green, red and blue) outputs/inputs, and bypassing the reciever on the video end, but then you would have to change inputs on the tv AND reciever to change from your cable box to your dvd player.

Kenwood VR-6050... | Answered on Nov 25, 2010 | 312 views


To an extent. Sound-wise, yes. It has 5.1 analog inputs.

Kenwood VR-6050... | Answered on Dec 27, 2009 | 76 views


It will be one of the drive belts , its better to get a repair shop to replace both belts , i have tried replacing belts myself and they are fiddly and time consuming , if you keep playing it the way it is you will damage the motors that turn the belts

Kenwood VR-6050... | Answered on May 24, 2009 | 156 views


http://www.docstoc.com/docs/1303225/Kenwood---VR-6050---VR6050pdf---Owners-Manual---English

here is the manual

Kenwood VR-6050... | Answered on Apr 26, 2009 | 213 views


you may have a dc condition present on speaker outputs. this could be caused by dry solder joints, suggest blanket resolder of the output stages for front channels.

Kenwood VR-6050... | Answered on Dec 13, 2008 | 293 views


Ummm.... your question is about a car radio, but you listed a home amp as the unit..... ?!? Anyway if it's a kenwood CAR radio, pressthe "ATT" button and it should go back to normal volume.

Kenwood VR-6050... | Answered on Sep 10, 2007 | 198 views


send it in to kenwood wirth it the damn thing got power tords it lol i got it pushing 200 wattsx5 with a power esp

Kenwood VR-6050... | Answered on Jun 25, 2007 | 189 views


Go to kenwood website they have it

Kenwood VR-6050... | Answered on Jul 23, 2010 | 299 views


Hello Educare Shalom, to be able to handle the volume of your kenwood tuner kt 45, you should connect a stereo potentiometer of 50 kOhms Linear in the output signal or connect it to a sound mixer, to be able to regulate the output level
Hola Educare Shalom, para poder manejar el volumen de tu kenwood tuner kt 45, deber?as conectar un potenciometro est?reo de 50 kOhms Lineal en la se?al de salida o conectarlo a un mezclador de sonido, para poder regular el nivel de salida

Kenwood Audio... | Answered 2 days ago | 47 views


Hello Kamran, I sent you the link to download the manuals of your Kenwood RXD-V323, so you can check the numbers of the belts you need
I hope it helps you
Greetings Franco Dosil

Hola Kamran, Te envio el link para que descargues los manuales de tu Kenwood RXD-V323, para que consultes los numeros de parte de las correas que necesitas
Espero te sirva
Saludos Franco Dosil
https://www.manualslib.com/manual/950090/Kenwood-Rxd-V323.html#product-RXD-V323
Download manual

Kenwood Audio... | Answered 2 days ago | 28 views


Hello Kamran, the Kenwood rxd-v323, does not have an echo option
Hola Kamran, el Kenwood rxd-v323, no trae opcion de eco
Kenwood RXD V323 Service Manual
Kenwood RXD V323 Manuals

Kenwood Audio... | Answered 2 days ago | 26 views


Hi David, if your Kenwood does not turn on, check the power input fuse, to locate it, you should remove the lid
If the fuse is burned, replace it with only one of equal value, to avoid serious damage, if you change it and it starts to burn, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil
Hola David, si tu Kenwood no enciende, revisa el fusible de entrada de energia, para ubicarlo, deberas retirar la tapa
Si el fusible esta quemado, reemplazalo solamente por uno de igual valor, para evitar graves da?os, si lo cambias y se vueve a quemar, busca un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Kenwood Audio... | Answered on Jun 13, 2019 | 26 views


Hello JoncoteO, if one of your Surround speakers does not work, you can not use the Front B speakers connection as a replacement
You should check if the output of your Kenwood is wrong or the speaker is wrong
Try connecting the Surround speaker that does not work, in the Surround output of the Kenwood that works, if you listen to it, well the problem is in the equipment
If you do not hear it, the speaker has the problem
I suggest you repair it, since you could have more damage
I hope you can solve the problem
Greetings Franco Dosil

Hola JoncoteO, si uno de tus parlantes Surround, no funciona, no puedes usar la conexi?n de parlantes Frontales B, como reemplazo
Debes comprobar si la salida de tu Kenwood esta mal o el parlante esta mal
Prueba conectar el parlante Surround que no funciona, en la salida Surround del Kenwood que funciona, si lo escuchas, bien el problema esta en el equipo
Si no lo escuchas, el parlante tiene el problema
Te sugiero que lo repares, ya que podr?as tener mayor cantidad de da?os
Espero puedas solucionar el problema
Saludos Franco Dosil
https://data2.manualslib.com/pdf2/29/2871/287046-kenwood/krfv5010.pdf?17d98b099c8a488d5135daf8097a974c&take=binary

Kenwood Audio... | Answered on Jun 13, 2019 | 19 views


Hi Michael, if your Kenwood CD 204 can play in random mode among the 5 CDs, you have the Randon button, for that function
On page 17, he explains the Randon function
I sent you the link of the user manual so you can download it
I hope you can solve your need
Greetings Franco Dosil

Hola Michael, si tu Kenwood CD 204 puede reproducir en modo aleatorio entre los 5 CD, tienes el bot?n de Randon, para esa funci?n
En la pagina 17, te explica la funci?n Randon
Te env?o el link del manual de usuario para que lo descargues
espero que puedas resolver tu necesidad
Saludos Franco Dosil

https://data2.manualslib.com/pdf/9/862/86192-kenwood/dpfr3010.pdf?e84121e9d1645b7418a0352ba4d72dd1&take=binary

Kenwood Audio... | Answered on May 12, 2019 | 27 views


Hello Rob, I'm looking for the Kenwood A65 user manual and I can not find it, I understand that you are looking to interconnect your equipment and be able to listen
I suggest you send me the list of equipment that you want to connect to the A65, please indicate your brand and model so you can generate an idea of interconnection and so you can solve your need
I am going to send you the link to download the service manual, in the first pages, the rear panel of the A65 appears, which will serve as a reference of where your equipment would be connected
I await your comment about your equipment
Greetings Franco Dosil

Hola Rob, estoy buscando el manual de usuario del Kenwood A65 y no lo encuentro, entiendo que lo esta buscando para interconectar sus equipos y poder escuchar
le sugiero me env?e el listado de equipos que quiere conectar al A65, por favor indique marca y modelo as? puede generar una idea de interconexion y as? podr? resolver su necesidad
yo le voy a enviar el link para que descargue el manual de servicio, en las primeras paginas, aparecen el panel trasero del A65, que le servir? de referencia de donde ir?an conectados su equipos
Espero su comentario sobre sus equipos
Saludos Franco Dosil

https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-A-65-Service-Manual.pdf

Kenwood Audio... | Answered on May 08, 2019 | 26 views

Not finding what you are looking for?
Kenwood VR-6050 Receiver Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

rigger094

Level 2 Expert

188 Answers

Mike Duncan
Mike Duncan

Level 2 Expert

219 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...