RQT670781 Press [c, OPEN/CLOSE] to open the tray.The unit comes on.2 Set a CD in the tray. (Label must face upward.)To continue loading CDs in the other traysPress [1]–[5] to select the required tray and press [c, OPEN/CLOSE] to open the tray.Press [c, OPEN/CLOSE] to close the tray.3 Press [1]–[5] to play your desired disc.(Alternatively, you can press [:/J, CD] if the current disc is yourdesired CD.)The track number and its elapsed playing time are shown.Use the CD Play Mode function’s ALL-DISC mode to play CDs insuccession. (A page 9)To stop the disc playPress [L, STOP].The total number of tracks and total playing time are shown.“” indicationIt indicates current disc has 16 or more tracks.One touch playDuring standby mode and when a CD is loaded, press [:/J, CD] or[1] - [5].The unit comes on and play starts.To pausePress [:/J, CD] during play.Press again to resume play.To search forward/Hold down [g/REW/3] (backward)backwardor [f/FF/4] (forward) during play or pause.To skip forward/Press [g/REW/3] (backward) orbackward[f/FF/4] (forward) during play or pause.Note• During 1-RANDOM or A-RANDOM play (A page 9), you cannotskip to tracks already played.• During program play (A page 9), 1-RANDOM or A-RANDOM play,you can search only within the track.• Always stop the changer before loading or changing CDs. Youcannot change CDs while a disc is playing.CD displayYou can display the remaining play time of the current track.RemotecontrolonlyPress [CD DISP] during play or pause.Every time you press the button:Elapsed play time Remaining play timeNoteWhen track number 25 or greater is playing, remaining play timedisplay shows “ –:– –”.CDsCD selectionChoose CDs with this mark:Do not:• use irregularly shaped CDs.• attach extra labels and stickers.• use CDs with labels and stickersthat are coming off or withadhesive exuding from underlabels and stickers.• attach scratch proof covers orany other kind of accessory.• write anything on the CD.• clean CDs with liquids. (Wipewith a soft, dry cloth.)• use CDs printed with labelprinters available on the market.To prevent damageAlways observe the following points:• Load only 1 CD on the tray.• Load CDs as shown in the figure.An adaptor is not needed with 8 cm CDs (singles).• Set the system on a flat, level surface.• Always unload all CDs before moving the unit.Do not:• set the unit on top of magazines, inclined surfaces, etc.• move the unit while a tray is opening/closing, or when loaded.• put anything except a CD in the tray.• use cleaning CDs or CDs which are badly warped or cracked.• disconnect the AC power supply cord from the household AC outletduring disc changing operation.8 cm CD12 cm CDThis unit can play WMA (SC-AK610 and SC-AK510 only), MP3and CD-DA (digital audio) format audio CD-R and CD-RW thathave been finalized (a process that enables CD-R/CD-RW playersto play audio CD-R and CD-RW) upon completion of recording.It may not be able to play some CD-R or CD-RW due to thecondition of the recording.3VOLVOLVOLVOL7 8 90106SHISHIFTCLOCKCLOCKTIMERTIMER//PLPL AYRECRECAUTOFFO OFFINTROINTROENTERENTERMARKERMARKERTITLETITLESEARCHSEARCHREWFFPROGPROGRAMAMREPREPEATATPLAY MODEAYMODEDISCDISCSPACESPACEABCABCDEFDEFGHIGHITUVTUVWXY ZPQRSPQRSJKLJKLMNOMNOSLEEPEEPCD DISPCDDISPDIMMERDIMMERALBUMBUMCURSORCURSORDELDEL45123TAPETAPECDCDAUXAUXCLEARLEARTUNERTUNERBANDNDWOOFERS.WOOFERCurrent disc indicator
Guru