'RQT6087ComponentsCD Control Operation ButtonsPLAY MODE: Press repeatedly to select one of the play modes forthe 3-CD changer. (see page 19, 20)CD EDIT:Press to select either Listening Edit or ProgramEdit recording mode. (see page 29, 30)CD REC:Press to perform synchronized recording of thecurrently selected CD in the 3-CD changer. (see page 26, 27)STOPs:Press to stop play of the selected disc in the 3-CDchanger. (see page 15)PLAYp:Press to start play of the selected disc in the 3-CDchanger. (see page 14)PAUSES:Press to pause play of the selected disc in the 3-CDchanger. (see page 15)Headphones JackUse this jack to connect headphones (not supplied) to the unit.PHONES LEVEL (Volume) ControlUse this to adjust the volume being output to headphones con-nected to the unit. NoteAvoid listening for prolonged periods of time to prevent hearingdamage.Remote Control SensorThis sensor receives commands from the remote control.NoteIn this manual, procedures using buttons on the front panel of theunit are depicted by the name of the button in capital letters withthe button illustration immediately after it. Procedures using thebuttons on the remote control are depicted by the button illustrationwith the name of the button in small letters and parentheses imme-diately after it.Example:CD Control PAUSE S button (Front panel)S (pause) button (Remote control)
Wiz