&RQT6087ComponentsDescription (For details, refer to page in parentheses.)POWER button and STANDBY lamp Press to switch the unit from on to standby mode or vice versa. Instandby mode, the unit is still consuming a small amount of power.When the unit is connected to the AC mains supply, the STANDBYlamp lights up in standby mode and goes out when the unit isturned on. (see page 13)CD Trays 1, 2, and 3 (numbered from bottom to top)Load CDs in these trays for 3-CD changer playback. (see page 14)DISC SELECTOR and OPEN/CLOSE 0 ButtonsPress to select the tray(s) that you want to play when CDs areloaded in the 3-CD changer. Icons show the currently selected traysin the display window. Use the OPEN/CLOSE 0 buttons to openand close the corresponding disc trays. (see page 14)CDR Disc TrayLoad a recordable CD-R or CD-RW in this tray for recording. CDplayback is also possible using this tray.REC SELECTOR and Source Selection LampsUse to select the type of source the signal is to be recorded from.The selected source is indicated by activation of the lamp under thesource name (located to the left). (see page 24, 33) OPEN/CLOSE 0 Button Press to open and close the CDR disc tray.MULTI JOG/REC LEVEL ControlUse this control for selecting and setting use options, changingclock settings, skipping forward/backward through tracks on a CD,etc. Also use it to adjust the level of the source signal when record-ing discs. MIX BALANCE ControlUse the MIX BALANCE control to adjust the mixing levels ofindependent signals being recorded simultaneously. (see page 35)CDR Control Operation ButtonsSYNCHRO:Press to select synchronized recording. (see page 33)MENU:Press to enter the menu options.SET:Press to enter an operation or selection. CANCEL:Press to cancel an operation or selection.FINALIZE:Press to finalize a CD-R/RW disc when recordinghas been completed. (see page 38)STOP s:Press to stop recording or playing of the CDR.(see page 15, 25)PLAY p:Press to start playing, or resume recording if theCDR is in the recording pause mode. (see page 15, 25)PAUSE S:Press to pause play or recording. (see page 16)REC/REC MUTE:Use to start recording, or when recording to mutethe recording signal. (see page 25, 29, 35)Display WindowDisplays operation modes and system information. (see page 10) Main UnitMAXMINPLAY MODEPHONESOPEN /CLOSEREC SELECTORMIX BALANCEMULTI JOGREC LEVEL+–CANCELSETMENUREC/REC MUTESYNCHROCD EDITCD RECFINALIZELINECDDIGITALPOWERCOMPACT DISC RECORDER SL-PR300DISC 1DISC 2DISC3OPEN /CLOSEDISCSELECTOR321LINECD
Guru