7Optical fiber cableCoaxial cablePeripheral equipment and cables sold separately unless otherwise indicated.CD, Tape deck and antennasConnecting the AC power supply cord and other informationThe included AC power supply cord is for use with this unitonly. Do not use it with other equipment.NoteConserving powerThe unit consumes 1 W even when it is turned off with [POWER, ^/l]. To savepower when the unit is not to be used for a long time, unplug it from thehousehold AC outlet.If the unit is left unplugged for longer than a few weeks, all settings will revertto the factory settings. Do the settings again if this occurs.LRLRR LRLCAUTION:TO PREVENT ELECTRICSHOCK MATCH WIDEBLADE OF PLUG TO WIDESLOT, FULLY INSERT.“SWITCHED” AC outletPower to the outlet is controlled by the powerswitch of this unit. Audio equipment rated upto a maximum of 80 W can be connectedhere. If equipment exceeding this rating isconnected, the outlet may be renderedinoperable. Consult your dealer to replace thefuse.Connect this cord after allother cables and cords areconnected.AC power supply cord(included)LRLRR LRLPLAY (OUT)REC (IN)If you have a graphic equalizer, connect it to theTAPE terminals.Tape deckDIGITAL OUTWhen attaching theAM loop antenna toanother surfaceScrew(included)Fix the other end of the antennawhere reception is best.Adhesive tapeFM indoor antenna (included)AM loop antenna (included)CD PlayerLRLINEOUTUsing the antenna holderFit the holder into the holes on the rearpanel, then attach the antenna to it,facing it in the direction of best reception.Keep the antenna cord away from tape decks, DVD players, and othercords.Outdoor antennas (\ page 16)AntennasHousehold AC outlet(AC 120 V/60 Hz)
Wiz