POWERSFC MODE8SPEAKERS PHONESDSPSOUND MODEDOLBYPRO LOGIC2-HELP–RESET-BAND–FM MODEMEMORYPRESET2TUNING 112Control guideTUNEDSTEREOMONOSPEAKERSkHzMHzPRO LOGIC 2DIGITALSOUND MODESTEREO SURROUNDSFCLCRSLSSRLFEPCMFIXM[SOUND MODE, STEREO, SURROUND, SFC]DSP sound mode indicators.Show the current DSP sound mode.[kHz, MHz]Frequency unit indicators. kHz: AM, MHz: FMThe display[SPEAKERS]Speaker indicator. Lights when the speakers are on.General displayShows the input mode, radio frequency, and other general information.[TUNED, MONO, STEREO, ˜]Radio indicators. TUNED:A station is tuned.MONO:You have switched to monaural mode with [-BAND, –FM MODE] to improve reception.STEREO: A stereo FM broadcast is tuned.˜:Flashes during presetting.[POWER, 8]Press to switch the unit from on to standby mode or vice versa.In standby mode, the unit is still consuming a small amount of power.[SPEAKERS]Turning the speakers off automatically engages the STEREO mode(when listening through headphones, for example).[-HELP, –RESET]Press if an error message appears. A message offering a possiblesolution scrolls across the display.To reinitiate the unit’s settings, press and hold until “RESET” appears.[PHONES]Headphone jack Plug type: 6.3 mm (1/4") stereoAvoid listening for prolonged periods of time to prevent hearing damage.Turn the speakers off when using the headphones.[TUNING, 2, 1]For tuning the radio and selecting preset stations.Press and hold until the frequency starts scrolling to start automatictuning. Tuning stops when a station is found.[PRESET]Press to allow preset station selection with [TUNING, 2, 1].[-BAND, –FM MODE]For switching between AM and FM.If reception is poor in FM, press and hold until “MONO” appears toswitch to monaural mode.[DSP SOUND MODE]For selecting “STEREO”, “SURROUND” or “SFC”.[MEMORY]For presetting radio stations.[SFC MODE, <, >]For selecting the SFC modes.[DOLBY PRO LOGIC 2]Use when “%PRO LOGIC 2” lights in the SURROUND mode.
Guru