SFC modesSURROUND modeSTEREO mode10Basic operationsSwitch on.POWER8TurnSPEAKERS on.SPEAKERSSelect input.TUNER ,/ CD ,/ DVDTAPE ,/ VCR 2 ,/ VCR 1 ,/ TVINPUT SELECTORDIGITAL INPUTSelect the DSPsound mode.Start play ofthe source.Adjust thevolume.DOWNUPVOLUME123456DSPSOUND MODESPEAKERSFor CD, DVD, TVSelect digital or analoginput.When you finish listeningBe sure to reduce the volume and press [POWER, 8] to switch the unitto standby.For your referenceIn rare cases, the unit may have trouble recognizing the digital signals ondiscs. ¡With the PCM signals on CDs, this may cause the beginning of a trackto be cut off. Engage the PCM FIX mode if this occurs.¡With DTS, the signals may not be recognized at all. Engage the DTSFIX mode if this occurs.While the input source is selected and digital input is engaged:Press and hold [DIGITAL INPUT].The current mode is displayed. Press again to change the mode.Each time you press the button:AUTO / PCM FIX / DTS FIXWhen a FIX mode is on, the unit cannot process other signals. This maycause noise to be output. Select “AUTO” if this occurs.The selected mode is stored for each input source even if the unit isturned off.NotesonusingtheDigitalSignalProcessorThe digital signal processor in this unit can decode thefollowing signals:¡Dolby Digital ¡DTS ¡PCMIt cannot decode:¡Other digital signals, such as MPEG¡PCM with sampling frequencies of 88.2 kHz, 96 kHz, 176.4 kHz or192 kHz¡Dolby Digital RF signals from a laser disc playerUse this mode to play digital or analog stereo sources or to playsurround sources through two speakers. When surround sourcesare played in this mode, the sounds intended for the otherspeaker channels are played through the front speakers.Select this mode when you are playing a digital surround source(Dolby Digital or DTS).Also select this mode when playing analog or digital stereosources. The Dolby Pro Logic 2 processor works not only onsources recorded with Dolby Surround, butalso on any stereo source. The followingmodes are available when using Dolby ProLogic 2.Enjoy an enhanced sound experience with greater presence andspread by using these SFC (sound field control) modes withPCM or analog stereo sources.The SFC modes cannot be used if the input signal is DolbyDigital or DTS. Choose from thefollowing modes.DOLBYPRO LOGIC 2SFC MODE<>SPEAKERSSOUND MODESTEREOLRSPEAKERSDIGITALSOUND MODESURROUNDLCRSLSRLFESPEAKERSSOUND MODESFCStep 1 2 3 4
Guru