Sony DVP-NS575P DVD Player - Page 7 - Answered Questions & Fixed issues

check is it sports with tall but zone 4.....

Sony Televison &... | Answered on May 28, 2019 | 25 views


Sony Televison &... | Answered on May 25, 2019 | 19 views

Hello Dennis, please indicate, which device is connected to your Sony projector, indicate brand, model and type of device (DVD, VCR or other)
This projector has 3 Video inputs, two color inputs separately (Component Video) and one Composite video
I suggest you replace the cable between the projector and the image source and check if the problem is corrected, if you do not have another cable, try to connect some video signal to the Composite video input and see if it is missing the red color, If so, you would have a problem in the projector, if it looks good, the cable would be wrong
I hope you manage to solve the problem, comment the results
Greetings Franco Dosil

Hola Dennis, por favor indica, que aparato esta conectado a tu proyector Sony, indica marca, modelo y tipo de aparato(DVD, VCR u otro)
Este proyector tiene 3 entradas de V?deo, dos entradas de color por separado (V?deo por Componentes) y una de v?deo Compuesto
Te sugiero que reemplaces el cable entre el proyector y la fuente de imagen y compruebes si se corrige el problema, si no cuentas con otro cable, prueba conectar alguna se?al de v?deo a la entrada de V?deo compuesto y observa si esta faltando el color rojo, si es as?, tendr?as un problema en el proyector, si se ve bien, estar?a mal el cable
Espero que logres resolver el problema, comenta los resultados
Saludos Franco Dosil

Sony Televison &... | Answered on May 24, 2019 | 20 views

You have this backwards. The applicable code would be in the URC, if it is compatible.

Sony Televison &... | Answered on May 21, 2019 | 22 views

if possible. reinstall your vcr code in your existing remote.
consider using another remote [ set to your vcrs code ] -- remotes sometimes low cost at dollar / thrift stores.

Sony Televison &... | Answered on May 20, 2019 | 23 views

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}

Sony Televison &... | Answered on May 17, 2019 | 50 views

It will be difficult to make a Blu-ray player region free. Anyway, visit these sites, and see whether there is any information about this.

Sony Televison &... | Answered on May 17, 2019 | 324 views

2time is over voltage error so please replace main board
Muhammad Nasir

Sony Televison &... | Answered on May 16, 2019 | 42 views

Hi Laurence, from what you describe, it would look like a power supply failure, like you say a loose solder
I recommend that you be careful with the manipulation of the source plate, since there may be loads in the capacitors
When you remove the back cover, locate the plate of the power supply and look for the input capacitor (s), to discharge them, then carefully check the solders that may be loose or cracked
Also note the low voltage capacitors, those on the secondary side of the source, that are not swollen or with the top open
After reviewing and resolving the source components, reassemble and test
In some models, you also have on the Main board, small subfuentes, try to locate and review them
If after doing all this, you do not have positive results, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil

Hola Laurence, por lo que describes, parecer?a una falla de fuente de alimentaci?n, como tu dices una soldadura floja
Te recomiendo que tengas cuidado con el manipuleo de la placa de fuente, ya que puede haber cargas en los capacitores
Cuando retires la tapa posterior, ubica la placa de la fuente de alimentaci?n y ah? busca el o los capacitores de entrada, para descargarlos, luego revisa minuciosamente las soldaduras que puedan estar flojas o agrietadas
Tambi?n observa los capacitores de baja tensi?n, los del lado secundario de la fuente, que no se encuentren hinchados o con la parte superior abierta
despu?s de revisar y resoldar los componentes de la fuente, vuelve a armarlo y prueba
En algunos modelos, tambi?n tienes en la placa Principal, peque?as subfuentes, trata de ubicaras y revisarlas
si despu?s de hacer todo esto, no tienes resultados positivos, busca a un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil

Sony Televison &... | Answered on May 15, 2019 | 18 views

Hello Paula, do not have video, nor sound?
I send a link of support to the Sony user, on the model of your TV
If you follow all the steps and do not achieve positive results, get close to a specialized technical service
I hope you can solve the problem, comment if it was
Greetings Franco Dosil

Hola Paula, no tienes video, ni tampoco sonido?
te envio un link del soporte al usuario de Sony, sobre el modelo de tu televisor
Si sigues todos los pasos y no logras resultados positivos, acercate a un servicio tecnico espeializado
Espero puedas resolver el problema, comenta si asi fue
Saludos Franco Dosil

Sony Televison &... | Answered on May 15, 2019 | 23 views

try this

Using a RESET button
  1. Locate the RESET button on the camera. NOTE: ...
  2. Use a pointed object (like a ballpoint pen) to press and hold the RESET button for 2-3 seconds.
  3. After 2-3 seconds has elapsed, release the RESET button.
  4. After the camera reboots, the time and date settings menu will be displayed.
Apr 11, 2018

How to reset or initialize a camera back to original factory ... - Sony

If not, you need to send for repair

Sony Televison &... | Answered on May 14, 2019 | 17 views

A player with certain region code but not a region free player will only play discs from certain regions. A region 2 player can only play region 2 discs. So if you get a discs with certain region codes, you could get a disc copy without region code and then you could play it on your player. You could use Leawo DVD Copy to get this kind of copy.

Sony Televison &... | Answered on May 14, 2019 | 457 views

I think it's more possible that the blank disc that you use to record the videos is not good enough. You could try some other blank discs such as Verbatim discs that are popular for its guaranteed quality. And make sure you choose the type of dvd that is designed for recording. You could also try Leawo DVD Creator which can burn videos to DVD without waiting for a long time of recording.

Sony Televison &... | Answered on May 14, 2019 | 52 views

Maybe you could check this post "How to Convert 8mm to DVD" with detailed steps about turning the 8mm to digital files and burn the digital files to DVD discs.

Sony Televison &... | Answered on May 14, 2019 | 37 views

Have you made sure the appropriate signal source is properly connected? Could it be you have selected an invalid input source? Use your remote to cycle through the Input options. Wait 5 - 10 seconds on each option to see if a picture appears.

Sony Televison &... | Answered on May 13, 2019 | 22 views

Hi James, this model does not exist for the Sanyo brand, if for Sony
What do you need, the interlook cable from the source or the complete power supply?
Discuss what you need
I wait your answer
Greetings Franco Dosil
Hola James, no existe este modelo para la marca Sanyo, si para Sony
Que necesitas, el cable interlook de la fuente o la fuente de alimentacion completa?
Comenta que estas necesitando
Espero tu Respuesta
Saludos Franco Dosil

Sony Televison &... | Answered on May 12, 2019 | 14 views

Hello Hugh, as I prove that its 4 HDMI ports, do not work ?, I try with another cable ?, the HDMI image source, with which I tested the four inputs, is the same?
Your HDMI image source, does it work?
It would be good to check the above indicated mind
Comment the results
Greetings Franco Dosil
Hola Hugh, como probo que sus 4 puertos HDMI, no funcionan?, probo con otro cable?, la fuente de imagen HDMI, con la que probo las cuatro entradas, es la misma?
Su fuente de imagen HDMI, funciona?
Seria bueno que compruebe lo indicado anterior mente
Comente los resultados
Saludos Franco Dosil

Sony Televison &... | Answered on May 11, 2019 | 33 views

In most of the case, the display panel is bad.

Sony Televison &... | Answered on May 09, 2019 | 21 views

Not finding what you are looking for?
Sony DVP-NS575P DVD Player Logo

178 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides