Top 20 Sylvania 6413TC 13" TV Questions & Answers

If its 20 inch its not the model in the photo here, aside from that if something serious is wrong cheaper to buy a new set than fix this one, I am willing to help if know model and whats wrong with it.

Play around with the menu button on the TV if it has one and see if there are any options to change it.

HelloJust buy one universal remote control, which have setup codes for Syllvania TV. You can get this information from the code list of the remote control. Most RCA universal remote will have setup codes for Sylvania tV.

i have a twothousead five emerson tv , something im trying to hook up is a ps2 now i dont have the remote but my ? is ways there a way to get my tv to switch to video 123 with out a remote or unavusal?

You have an aging TV and aging capacitors. There may be some bad grounds on the solder side of the main board. You need to first inspect the solder side of the board for bad solder connections. And find an ESR meter. (Capacitor Checker) No doubt you will find some weak capacitors. I would look for those almost anywhere on this TV. This TV is small and you should be able to test each and every electrolytic capacitor. The electrolytics are the caps that look like small cans with two legs. They are rated in Mfs. For example 35 volts @ 100 MF, 16 volts @47 Mf, 25 volts @ 4.7 MF, etc. Test all of them and replace as necessary. Good Luck and thanks for asking. Show a few hands of support.

Ok. Can you please get me the make and model of the remote so that I can check if I have the code for it?

-as usual; try to start tv with the power botton on set.
-press and hold tv botton on remote untill the led light stays on
-the with the rate of one second press on/off botton on remote, aim the remote at the set
-when the tv set goes off immediately press enter on remote.
-this will program your remote, but still you dont have the code for the future when changing batteries.

get an universal remote control....look for the code for the tv...and u can get the tv working.........

Sylvania 0054, 0030, 0020, 0096
These are the Manufactures Code for that brand of Tv

Hope this Helps you out.

Cheers

Little Dish Fitter

pls resolder the system ic and there area

I can help you with your URC-3220 Universal Remote Control issues.

The URC-3220 codes for Sylvania TV's are: 0054, 0030, & 0171.

For complete instructions on entering the URC-3220 remote codes, please refer to my posted Fixya Tip One For All URC-3220 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

Hold The Tv Or Device To Be Programmed and hit power with it. then hit power until it turns on or off. then hit enter if you have one or hit tv/dvd/cable again. Hope This Helps

You will need to call our technical support line on 0845 20 20 118. Click Here for help

Buzzing nois of this kind can come from a short or from disturbance.

Hi DiBd. Some electronic components in a tv can go out of tolerance during long periods of inactivity. I think that's what's happened to your set. Some component in the video section of your tv has given up.

Greg.

go up to your TV and go into the menu. Go to the channel selection and run the auto select for channels. This will take some time but the TV will end off the first channel found, the only thing is you cannot get back into video mode without the remote

popa flaggy poo.

the code is 0520

go to picture in the menu drop... game ON OFF is first option