Fujinon Mariner WPC-XL Binocular - Page 6 - Answered Questions & Fixed issues
How to recalibrate Golf Buddy Voice 2
Please perform a firmware update on your unit through using GB manager.
If that does not fix the issue, attempt the following steps to perform an emergency reboot:
*NOTE: If you have a WORLD unit, please replace the MENU button with the PROPLAY button to perform this reboot.
1. Please make sure that the unit is turned OFF.
2. Hold down the MENU button, then press the POWER button simultaneously.
3. Once the LCD (screen) powers on, release the POWER button BUT keep the MENU button pressed.
4. Once you see EMERGENCY REBOOT on the screen, release the MENU button and wait about 3-5 minutes for reboot to factory settings.
You may also try the emergency reboot using your computer (most effective way) by following these steps:
1. Make sure the GolfBuddy is powered off.
2. Please connect your USB cable to the computer WITHOUT your unit.
3. Hold down the Menu button.
4. As you are holding the Menu button down, please connect your GolfBuddy to the USB cable.
5. Once you see the EMERGENCY REBOOT screen, please release the Menu button but leave your unit connected to the USB cable until the process completes.
11/7/2019 12:28:25 PM •
Optics
•
Answered
on Nov 07, 2019
•
572 views
How do i replace the hand grip on guardian red dot crutches?
I had the same problem, but i found an answer.have a friend with 2 good feet help you with this. Turn the crutch upside down and place armrest on the ground.Stand on the outside edges of the armrest and pull crutch upward. The armrest is not glued to the rest of the unit. It's just a snug fit. Once the armrest is removed, the hand piece can be removed. Now comes the struggle to remove the damaged rubber hand grip, and put the new one on, took me about 5 minutes to do this step.Then reverse what you've done, put the hand grip back on the crutch, put the armrest back on, turn the crutch upside down, and push the armrest back into place.Hope this helps!
10/27/2019 8:21:40 PM •
Optics
•
Answered
on Oct 27, 2019
•
5,674 views
I need turret caps for konuspro
Words cannot begin to express how honoured and grateful we are that you have chosen to share this vital information with us. Had you asked where you could obtain these items, we would have been more that happy to have attempted to help you, but alas, all you did was tell us of your plight.
10/14/2019 8:58:51 AM •
Optics
•
Answered
on Oct 14, 2019
•
283 views
300 savage model 99. What year was it mfg. ?
You did not supply all needed information so I am just guessing this might help.
Dates of Manufacture* for:
Savage 1895/1899/99.
.
Our database contains values of serial numbers through 566,000 which ended the year 1950. Serials did not strictly run sequentially. Therefore, dates may be a year different, especially near the "boundaries".
Enter the serial number (leave out the "," or ".") of your Savage 1895/1899/99 in the box below:
American Rifleman (July, 1980; page 28) contains a very different set of dates for serial numbers through 193000.
Enter the serial number (leave out the "," or ".") of your Savage 1895/1899 in the box below:
Lever Boss Codes:
A = 1949
B = 1950
C = 1951
D = 1952
E = 1953
F = 1954
G = 1955
H = 1956
I = 1957
J = 1958
K = 1959
L = 1960
M = 1961
N = 1962
P = 1963
R = 1964
S = 1965
T = 1966
U = 1967
V = 1968
W = 1969
X = 1970
10/10/2019 6:12:21 AM •
Optics
•
Answered
on Oct 10, 2019
•
2,039 views
308 168gr hornady with IMR 4320
At Last !!!!!
I have been waiting for someone to say this for absolutely ages ! Well done and thank you.
BTW, what does it mean ?
7/10/2019 8:26:05 PM •
Optics
•
Answered
on Jul 10, 2019
•
189 views
Serial numbers to year
Sorry, my ESP is switched off.
If you give no details of the optical equipment, how do you expect anyone to be able to answer ?
7/6/2019 2:27:14 PM •
Optics
•
Answered
on Jul 06, 2019
•
178 views
Not finding what you are looking for?