Common Issues with Philips 32PW9308 32" TV - page 12
Solved Problems
-
My tv will not recognize my remote. It stopped
Hello, Common faults are: some buttons not working, not working at all, corroded battery terminals. Often buttons are sticky because of some...
-
i have a philips 21PT2324/71 if i turn on the tv
This usually power supply problem, try to replace with new one
-
I have a philips magnavox model HD1918 C125 that
Go to a tv repair store, they sell RF Modulator that is made to work with your tv, and comes with everything you need to get hooked up and...
-
horizontal output always broken
that is your fly back(high voltage transformer) or the b+ regulator are short/best is to call a tecnician or buy a new one dependinh on the...
-
Our Magnavox TV has blurry
Hello d knight.... the symptoms you are describing are not good or easy for a do it yourselfer to work on. If your TV is less than three...
-
i want to have diagram
While trying to look for your Vintage diagram ( if available ) , Instead have a look , trace and identify circuits on the receiver. There...
-
37" full hd philips tv screen cracked because
If there is picture in the TV then probably it is the protective screen that has cracked and not the picture tube.Please check carefully.
-
How to unlock my TV? How i can reach to menu
hi, try the following for unlocking your tv The Factory code number is 0 0 0 0 If the code has been changed, You can select to reset...
-
model 42pfl3603d/f7 tv stopped receiving signal
If you find the remote sensor eye located on the front of the TV, you are there!!! There is a small sensor board and a TV tech will have to...
-
power does not stay on
Your TV set is defective, please contact expert help.
Fix-O-Meter
1,279
1,279 people have viewed this product
- 15 people asked about this product.
- 3 people found solutions for this product.
- 0 people have added this product. Be the first!