E-Machines eMachines Desktop PC - Answered Questions & Fixed issues


A computer running slow down for many reasons, but most of those boil down to one thing - how do you use it. If you are experiencing this issue, you are not alone, nearly half of the complaints received by computer repair technicians were related to poor system performance or system slow down. Here are the top six reasons why your computer is performing slower. Read this blog to know more https://antivirus.comodo.com/blog/computer-safety/6-reasons-why-pc-running-slow/?af=9557


pc-running-slow-vgykpbqelaymkvgjowttuz2p-4-0.jpg

E-Machines... | Answered on Jul 04, 2018 | 105 views


you need to reinstall chrome because there is a corrupt or missing file needed to remain stable........click here to get it....when ur done make sure you remove all other internet browsers and set chrome as your default...you should be good to go. Good Luck and pls rate this post!! :D

E-Machines... | Answered on May 28, 2018 | 592 views


Hardware stores usually sell adhesive rubber pads just look for something that resembles the missing feet on your netbook.

E-Machines... | Answered on Feb 13, 2018 | 41 views


not sure think you need recovery CD,but go to this link it might help you out.. system restore windows xp emachines T3516 Google Search

E-Machines... | Answered on Oct 27, 2017 | 27 views


Try booting it to safe mode and see if it does it there. If it doesn't it seems like it could be software related, if it does do it there it is probably hardware

E-Machines... | Answered on Sep 28, 2017 | 202 views


Hiya,

I have an image for you to look at, and I will need confirmation that this is or is or is not what you are giving reference to.

http://techreport.com/r.x/tyan-tigermpx/power-connectors.jpg

As far as your issue goes, cable P7 should be marked on both the connector block, and quite possibly onto the motherboard. How many pins are on the connector? if its 4 (two rows of two) then this will plug into the motherboard, and is the Intel board supply. If it is either a 20 or 24 pin block, then this will plug into the motherboard, and this supplies your entire mainboard components with power. If it is 4 or 5 pinned, has red, yellow, and black wiring, and has two corners cut off at one side, then this is the power supply cable for a hard disk drive or CD/DVD drive.
If it is a 4 or five pins white or black block spade like connector, then this will serve a floppy, flop drive for power. If it as spade type connector with loads of pins on it, and about the same size as the hard drive and CD/DVD drive power cable as above described, then this is a SATA power cable, and will power any SATA devices. You will also notice that a SATA drive will also have a smaller complete red or black cable that is similar to its bigger SATA power supply cable. The smaller one is for data.

NOTE:

all of these power cables have grooves, notches or angles cut on either one side, or are shaped so that they will only fit one way. Do not try to force these into any other slot, or you may cause damage.

I hope that this is the fixya for you, and if in the meantime you have any further queries or comments, please do not hesitate to get in contact with me.

Your sincerely

Oz

E-Machines... | Answered on Sep 20, 2017 | 4,973 views


The beep signifies an error. But different bioses have different beeps. You can check with the emachine site to tell you what 1 beep on the machine signifies and you can be guided accordingly. Could be bad power supply, connection, peripheral, etc

E-Machines... | Answered on Sep 01, 2017 | 61 views


You will have to contact cox for that information. I do not know where you are so I do not know the number. Cox can change your password or reset it for you. Been there, had the same problem myself one time.

Did my answer solve your problem?

Rate this as a Fixya if it is fixed.

E-Machines... | Answered on Aug 23, 2017 | 82 views


Bogus unit - return it for another.

E-Machines... | Answered on Aug 21, 2017 | 94 views


For a number to call and get tech support for an emachine you have to purchase it. The best thing I would reccomend is free chat with tech support. If you cannot get any answers from there I would be more than happy to help you out free of charge..

E-Machines... | Answered on Aug 03, 2017 | 239 views


Bluetooth is not software, but hardware. Cell phones come with bluetooth built in, so all you have to buy is the bluetooth headset. But computers never come with bluetooth as far as I know. You can buy a sound system for your computer that works over bluetooth frequencies, but that is not built into the computer. If you wanted to use a hands free headset on a computer, you have to buy the bluetooth receiver as well, and plug it into the USB port.

E-Machines... | Answered on Dec 26, 2016 | 107 views


go to the control panel double click DISPLAY then select setting then select 1440x900

E-Machines... | Answered on Dec 18, 2016 | 199 views


you will need to restore your windows by the sounds of it.

E-Machines... | Answered on Oct 27, 2016 | 69 views


https://support.google.com/a/answer/33561?hl=en .
not sure if this is what you are asking for.

E-Machines... | Answered on Oct 26, 2016 | 59 views


change your SMPS .it is faulty.

E-Machines... | Answered on Oct 11, 2016 | 497 views


when you say cannot turn on cpu - what do you mean - ?
cannot boot up?
try removing the cmos battery for a minute then replace and try again.

any error beeps ?


working fine before ?

E-Machines... | Answered on Oct 11, 2016 | 204 views


this error i suspect is a server error. farmtown is still a beta game. which means its still in the testing phase and developers did not think it would get this popular therefore they are still adjusting to the amount of people who are joining. i read up on some helpful tips however. save log out and back in sometimes works. sometimes clicking your experience bar works. the error is developer/server related so there is really nothing anyone but the developers can do but they are working on the problem.

E-Machines... | Answered on Oct 11, 2016 | 279 views


first try to check if your wireless can actually detect a network, if it can try to remove ALLthe network that you have on your wireless network and try to add your network again, if still doest work try to uninstall and re install your wireless driver, if it still doesnt work try to restart your router, if still doesnt work try to do system restore to the point where your wireless was workin fine, lastly if still doesnt work try to contact your ISP for some configuration.

E-Machines... | Answered on Sep 25, 2016 | 2,013 views

Not finding what you are looking for?
E-Machines eMachines Desktop PC Logo

5,282 questions posted

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Alun Cox

Level 3 Expert

2678 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18426 Answers

Brad Brown

Level 3 Expert

17490 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...