20 Most Recent Philips 60PP9352 60" Rear Projection Television - Page 4 Questions & Answers


HI, thank you for visit fixya.
Common problem on this set .
Picture tube liquid is dirty.
Mostly in crt green and crt blue.
Do you have electronics skills?. If so, open the TV ( back cover), you will see green,blue and red gun. After turn on your tv, select any channel or video signal, cover with piece a paper two guns at the top ( any), and see how look the picture in the front, try one at time, ( press menu on remote control and see leters-clear). I am sure the green and blue will be no clear. all the time red tube is fine.
REPLACE COOLANT LIQUID PROJECTION ( solution).
I will be here for any quetions.
Thank you

Philips 60PP9352... | Answered on Dec 05, 2009


You can get the convergence repair kit which contains full instructions on Cd and you can also get the Phillips CRT coolant Kit with instructions at www.tvrepairworld.com Free shipping within the US

Philips 60PP9352... | Answered on Nov 28, 2009


Hello the problem is the deflection Board has failed. This board is responsible for High Voltage to the Crts and various other duties. Seems you may have a bad flyback transformer and horizontal output transistor if you replace one replace the other also as they work in conjunction with each other.. Or you can replace the board alltogether.

Philips 60PP9352... | Answered on Nov 28, 2009


124 was the standard for cable when the TV was made.
You have to get an external box from your provider.

Philips 60PP9352... | Answered on Nov 27, 2009


Repaced the bulb,still the same,replaced the tube coolants.Try Tv repair World.com.

Philips 60PP9352... | Answered on Nov 21, 2009


Try adjusting the convergence. If it won't move see below- (or hitting Magic Focus for some Hitachi’s)

This sounds like convergence output IC problem. convergence board would have to be removed - remove and replace 2 STK IC's and check the surrounding resistors. Shops usually charge between $200-$400 Be sure to vote/rate me if this helped Thanks!
See link for more detail
http://www.ehow.com/how_4575598_yourself-projection-tv-repair-convergence.html

Philips 60PP9352... | Answered on Nov 07, 2009


ok, I found out what I really needed was a HD15 connector, which is not as hard to find as a BD15 connector,,
I still need to find out what type of plug the HDreciever will have, either a HDMI or RGB. I guess I have to trust that my TV has a circuit board that will translate the infor after getting the correct cords...
Wish me luck....
any other help or suggestions would still be nice....
thanks

Philips 60PP9352... | Answered on Nov 05, 2009


There are two common problems with Projection TV sets. Problem #1) Convergence Symptoms:
  • Screen Looks 3D
  • Colors wont align
  • Video may look distorted
Problem #2 CRT Fluid has clouded over. Symtoms
  • Dull looking video
  • White looking video
  • Halos around objects
  • Red/Orange looking video

You can see some examples and find a fix here...

bb0cf99.pngSOLUTION http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Philips 60PP9352... | Answered on Oct 18, 2009


You have the very common issue of like an algae substance that grown in at least 2 of the 3 CRT cooling liquid reservoirs. This is a technician fix as it requires draining, cleaning and re-filling the cooling reservoirs on the effected CRT's..

Philips 60PP9352... | Answered on Oct 17, 2009


This is a very common failure on Projection TV sets.
Screen looks 3D
Colors don't line up
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed or warped.
You can see some example photos and find a solution here...
http://www.fixya.com/support/r2861627-updated_convergence_problems_amp

Philips 60PP9352... | Answered on Sep 13, 2009


This is a very common failure on Projection TV sets. The CRT fluid is cludy and needs to be replaced.

You can see some example photos and find a solution here...

http://www.fixya.com/support/r2861467-solution_video_looking_whiteish_dull

Philips 60PP9352... | Answered on Sep 06, 2009


Its a convergence problem. You may want to check the site www.tvrepairkits.com. Every thing they said every description was right on. The best money I ever spent and the confidence you get from doing it yourself, Its a great feeling of achievement not to forget the live messenger support is instantaneous, friendly and informative if you need to fix your tv go to tvrepairkits.com I fixed a philips 60 inch tv in 45 minutes, The convergecne chips were bad thanks a million. You guys saved me 250.00 bucks. I'll be recommending you to everyone I know!

Philips 60PP9352... | Answered on Aug 19, 2009


You may want to check the site www.tvrepairkits.com. Every thing they said every description was right on. The best money I ever spent and the confidence you get from doing it yourself, Its a great feeling of achievement not to forget the live messenger support is instantaneous, friendly and informative if you need to fix your tv go to tvrepairkits.com I fixed a philips 60 inch tv in 45 minutes. You guys saved me 250.00 bucks. I'll be recommending you to everyone I know!

Philips 60PP9352... | Answered on Aug 19, 2009


60PP9352: 1439 mm (W) x 1508 mm (H) x 683 mm (D)
(56.7 in. x 59.4 in. x 26.9 in.)

this is a very good quality tv.

AND here is the owner manual link
http://www.retrevo.com/d/ds/progress?doc=9e9fcb736afd89a1def2c9a2d247658a

Philips 60PP9352... | Answered on Aug 16, 2009


You should try, www.discount-merchant.dot you might find it there..

Philips 60PP9352... | Answered on Aug 12, 2009


I have a philips magnavox and had two problems that I recently fixed using kits from www.TvRepairKits.com. I can't say enough about their kits and help. Without them I would have never been able to fix my TV set myself.

The first problem I had was the TV was looking 3D. After doing some homework I found out that this is a convergence problem. I bought a kit, followed the instructions, and to my amazement fixed it myself.

After building my confidence with the 1st repair I decided to get their CRT fluid kit. This kit fixes the dull video,red video, or bright/halo looking video. If you have a magmavox set that is more than 5 years old your tv has this problem already. It happens on every set. As before I bought the kit, followed the instructions, and now my video looks factory new. Once again I wanted to say thanks to the team at Tv Repair Kits for putting together kits that the average joe can use.

ML

Philips 60PP9352... | Answered on Aug 09, 2009


hello i would order a remote first if the colours do not relign then it could be the convergance chips may be the problem good luck

shaun

Philips 60PP9352... | Answered on Aug 06, 2009


It would be best if you check the speakers, there's a possibility that they might be blown up.

Philips 60PP9352... | Answered on Jul 31, 2009


check to see if you have speakers sitting too close to your television. the magnetic field from them can produce a condition called gaussing. newer televisions will eventually correct themselves while older ones will have to have to be degaussed by a technician

Philips 60PP9352... | Answered on Jul 31, 2009

Not finding what you are looking for?
Philips 60PP9352 60" Rear Projection Television Logo

182 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

matt martin
matt martin

Level 3 Expert

1255 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Philips Televison & Video

  • Philips Televison & Video

Most Popular Question

phillips 37fd9944 01s plasma tv power

  • Televison & Video
Loading...