Sharp 19R-M100 19" TV

Problems & Solutions

• how to hook up a

  Ur tv have colors R,Y,W Video,Audio IN holes from the back or the front wright?The DVD player have R,Y...

  • kellywhelan
  • 10/20/2010 11:48:31 PM
  • 96 Views

  1 Solution

• Parental Control V chip has been activated.

  on my Sharp 36R-s400. Go to menu , then parental control. When dispaly asks for secret number, press and...

  • lee_9
  • 9/6/2008 3:22:16 PM
  • 437 Views

  1 Solution

• Sharp M100 -- After power on/off many times, the picture...

  AS I RECALL THERE IS A BAD 470 UFD CAPICATOR IN THE START UP SUPPLY I THINK 13 VOLTS

  • Guest
  • 5/30/2006 4:03:20 PM
  • 128 Views

  1 Solution

• channel 6 on cable comes in snowy on one tv other 3...

  The tuner to this TV should be suspected. Replace it.

  • jamespcareyj
  • 1/23/2013 6:59:08 PM
  • 0 Views

  1 Solution

• i need the code of the remote control

  Setup codes for Sharp TV are0079 0123 0063 0020 0004 0009 0226 0266 0006 0095 0122 

  • El Miguel
  • 6/15/2012 4:00:29 PM
  • 9 Views

  1 Solution

• DEAD SET

  check the power supply.check the fuse first.

  • cooperdal686
  • 11/8/2010 2:54:51 AM
  • 32 Views

  1 Solution

• Why is there no sound? The tv is not on mute and

  The Loudspeaker may be defective

  • taniagrozell
  • 10/12/2010 10:39:25 PM
  • 41 Views

  1 Solution

• Turning off the talking words

  Do this with the remote under the setup menu.

  • ptmccann
  • 7/3/2010 3:01:48 PM
  • 15 Views

  1 Solution

• I don't know how to set the tv to receive all of the...

  Enter the "menu" and select auto program. This will allow the set to search for all available cha...

  • philip111162
  • 4/16/2010 5:55:13 PM
  • 78 Views

  1 Solution

• whenever i plug the tv in and push the power

  Sounds like your power supply is dead

  • ismelles829
  • 2/7/2010 4:29:48 PM
  • 86 Views

  1 Solution

• tv repair

  A vertical line means the line is up and down in the middle of the screen. That would indicate that the...

  • sappydude
  • 11/29/2009 9:20:02 PM
  • 150 Views

  1 Solution

• excessive brightness with horizontal retrace lines

  This usually means the red, green and blue driver transistors on the CRT board have lost their 180 vol...

  • Ken Qui
  • 11/12/2009 5:44:43 PM
  • 118 Views

  1 Solution

• need unlock parental code

  We cannot supply this information as we have no way of checking if you are a minor trying to subvert the...

  • dunn9315
  • 9/20/2009 11:11:51 PM
  • 47 Views

  1 Solution

• tv showing green with screen lines

  hv is to higth

  • godspower
  • 5/2/2009 7:56:36 PM
  • 59 Views

  1 Solution

• picture is only black and white

  check the color system, if the antenna signal is weak the color will B/W also.

  • jkoc
  • 7/6/2009 10:26:41 PM
  • 37 Views

  1 Solution