20 Most Recent
NCR 7875 Questions & Answers
NCR scanner scale 7875 communicating with pc
You would need a PC to communicate it with. Either Via USB or the DataRX port.
Capital Computer Group, LLC
651-405-8293
www.capcom-ncr.com
We specialize in the NCR arena, also have many other point of sale needs.
Free bench testing equipment failure on any p.o.s hardware item.
7/21/2014 9:52:40 PM •
NCR 7875
•
Answered
on Jul 21, 2014
Programming scale to display in pounds
ITS YOUR SCALE BOARD! <-- I am also an NCR Technician (Now Sales and Technician)
Capital Computer Group
2425 Enterprise Dr.
#200
Mendota Heights MN, 55120
[email protected]
651-405-8293
We Buy, Sell, Repair, and Refurbish both new and used POS Systems, NCR,
IBM... We also offer structured cabling as well as Video Surveillance
Equipment.
Give us a call and we can trouble shoot it with you!
8/4/2012 8:25:33 AM •
NCR 7875
•
Answered
on Aug 04, 2012
NCR 7875 Scanner/Scale Communication problem with PC
You need another cable (the metrologic cable doesnt work with the same configuration) and set the button in the interface card to rs-232 and program the scanner-scale with the programing tags.
6/16/2012 2:57:39 PM •
NCR 7875
•
Answered
on Jun 16, 2012
I need to change an NCR 7875 - 2000 from lbs to kg
Firstly you will need NCR Scan Tags. You can download from
http://ncrpr.ncr.com/web/rsdmkt/dealerReady/docs/User_Guides/HighPer_Scanner-User-Guide.pdf
You will have to print out the Scan Tags which start at page 281 and you will also need the correct weights; 0kg, 2.5kg, 5kg and 10kg.
Then follow these steps and be sure to scan tags in correct order:
1. Reset
2. Default
3. Program mode
4. Hex 3
5. Hex 0
6. Hex 1
7. Push the calibrate button under weighing tray
8. Place the correct weights in order. It will ask for the weights in order.
9. Calibration complete
2/24/2011 12:05:02 AM •
NCR 7875
•
Answered
on Feb 24, 2011
479
Capital Computer Group, LLC
651-405-8293
www.capcom-ncr.com
We specialize in the NCR arena, also have many other point of sale needs.
Free bench testing equipment failure on any p.o.s hardware item.
4/22/2010 7:23:50 PM •
NCR 7875
•
Answered
on Apr 22, 2010
Ncr Scanner 7875-2000
Hmmmm.... It sounds as though your scanner is not programmed correctly. Either RS232 or IBM... Either way it sounds as though it is not accepting your communication entry. Which could be your Eeprom chip, a digital board, maybe even the dual I/O board, in most cases.
Capital Computer Group, LLC
651-405-8293
www.capcom-ncr.com
We specialize in the NCR arena, also have many other point of sale needs.
Free bench testing equipment failure on any p.o.s hardware item.
4/22/2010 6:56:07 PM •
NCR 7875
•
Answered
on Apr 22, 2010
I need to find the power requirement info for an
The power supply for a 7875-2XXX series
PN: 497-0435538
input: 100V-250V
Output: +/- 5V -- 1.5A
-12 v --- 0.3 a
Capital Computer Group, LLC
651-405-8293
www.capcom-ncr.com
We specialize in the NCR arena, also have many other point of sale needs.
Free bench testing equipment failure on any p.o.s hardware item.
4/22/2010 6:52:35 PM •
NCR 7875
•
Answered
on Apr 22, 2010
7875 scanner/scale error code 4.
Problem is with the scale part of theunit, it needs calibrating, you can do this but you do need a set of weights, and it also depends on what country you are in reference the legality after you have done this. But chack fist the top plate is OK not damaged and sits OK, press scale zero. If that does not work there is a cover at the front of the unit sometimes with a seal over it or through the part that stops the cover being shown. Press the button under thisand follow the audio instructions, you will need 2.5kg, 5kg & 10kg or 5lb, 15lb & 30lb depending on ncountry you may need Weights & Measures in to verify afterwords depending on legalities
4/22/2010 6:12:26 PM •
NCR 7875
•
Answered
on Apr 22, 2010
Not finding what you are looking for?